[j-nsp] SRX300 Sudden Reboot

[Mohammad Khalil]

Thanks all for the kind replies.
Adding to that , the FW got hanged and I cannot access it remotely unless
it is rebooted manually.
It keeps working for couple of days and then it is back again to hang
status.
Current SW version is 15.1X49

Any recommendations ? Should I do an upgrade?

BR,
Mohammad

On Fri, 23 Oct 2020 at 01:31, <mzenarosa at dosarrest.com> wrote:

> I'd check for any firmware bugs that may have been triggered and caused a
> reboot.
>
> On Oct 22, 2020 15:22, Emille Blanc <emille at abccommunications.com> wrote:
>
> What was the reported reboot reason?
> You will find that in 'show chassis routing-engine'
>
> -----Original Message-----
> From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf
> Of Mohammad Khalil
> Sent: Thursday, October 22, 2020 3:13 PM
> To: Juniper List
> Subject: [j-nsp] SRX300 Sudden Reboot
>
> Greetings
> I have SRX300 which is running normally for long time except for the last
> two weeks where I have suffered from sudden reboot.
> Model: srx300
> Junos: 15.1X49-D70.3
> JUNOS Software Release [15.1X49-D70.3]
>
> Nothing has been changed or added and nothing in the log messages is
> related to this.
> As well , no active alrams and temperature levels are fine:
> tbzadmin at FW-PB-NEW# run show chassis environment
> Class Item                           Status     Measurement
> Temp  Routing Engine                 OK         45 degrees C / 113 degrees
> F
>       Routing Engine CPU             OK         58 degrees C / 136 degrees
> F
> Power Power Supply 0                 OK
>
> What could be the issue?
>
> Much appreciated.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
>