[j-nsp] Does QinQ work with VPLS on Juniper300?

[Roger Wiklund]

That's interesting. According to this page QinQ is not supported on
SRX300/320, not sure if that has anything to do with it?

Configuring Q-in-Q Tunneling on Security Devices - TechLibrary - Juniper
Networks
<https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/layer2-security-qinq-tunneling-srx-series-els.html>

NOTE Q-in-Q VLAN tagging is supported only on SRX340, SRX345, SRX550M, and
SRX1500 devices.

NOTE VLAN translation is supported on SRX300 and SRX320 devices and these
devices do not support Q-in-Q tunneling.

On Thu, Jan 28, 2021 at 6:11 AM Try Chhay <try.chhay at gmail.com> wrote:

> Dear Juniper NSP,
>
> We are trying to get QinQ working with VPLS on Juniper SRX300 but the
> configuration of QinQ seems limited with VPLS as we cannot insert full QinQ
> commands.
> a. Below is my QinQ Configuration is working fine on Juniper SRX300 without
> having any VPLS
> set interfaces ge-0/0/0 flexible-vlan-tagging
> set interfaces ge-0/0/0 encapsulation extended-vlan-bridge
> set interfaces ge-0/0/0 unit 467 vlan-id-list 1-4094
> set interfaces ge-0/0/0 unit 467 input-vlan-map push
> set interfaces ge-0/0/0 unit 467 output-vlan-map pop
> set interfaces ge-0/0/0 unit 467 family ethernet-switching vlan members
> VL467-TEST
>
> b. Below is VPLS and QinQ configuration are not working
> set routing-instances VLAN467 instance-type vpls
> set routing-instances VLAN467 interface ge-0/0/0.467
> set routing-instances VLAN467 protocols vpls encapsulation-type
> ethernet-vlan
> set routing-instances VLAN467 protocols vpls no-tunnel-services
> set routing-instances VLAN467 protocols vpls vpls-id 467
> set routing-instances VLAN467 protocols vpls ignore-mtu-mismatch
> set routing-instances VLAN467 protocols vpls ignore-encapsulation-mismatch
> set routing-instances VLAN467 protocols vpls neighbor 1.1.1.1
>
> set interfaces ge-0/0/0 flexible-vlan-tagging
> set interfaces ge-0/0/0 encapsulation extended-vlan-bridge
> set interfaces ge-0/0/0 unit 467 vlan-id-list 1-4094
> set interfaces ge-0/0/0 unit 467 input-vlan-map push
> set interfaces ge-0/0/0 unit 467 output-vlan-map pop
> set interfaces ge-0/0/0 unit 467 family ethernet-switching vlan members
> VL467-TEST  (when apply this command, juniper srx300 does not allow us to
> commit)
>
> Does anyone here used to experience this issue? Could you please help to
> advise how to get QinQ work with VPLS on Juniper 300? Many thanks for your
> help in advance...
>
> Kind regards,
> Try Chhay
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>