[j-nsp] Does QinQ work with VPLS on Juniper300?

[Try Chhay]

Dear Juniper NSP,

We are trying to get QinQ working with VPLS on Juniper SRX300 but the
configuration of QinQ seems limited with VPLS as we cannot insert full QinQ
commands.
a. Below is my QinQ Configuration is working fine on Juniper SRX300 without
having any VPLS
set interfaces ge-0/0/0 flexible-vlan-tagging
set interfaces ge-0/0/0 encapsulation extended-vlan-bridge
set interfaces ge-0/0/0 unit 467 vlan-id-list 1-4094
set interfaces ge-0/0/0 unit 467 input-vlan-map push
set interfaces ge-0/0/0 unit 467 output-vlan-map pop
set interfaces ge-0/0/0 unit 467 family ethernet-switching vlan members
VL467-TEST

b. Below is VPLS and QinQ configuration are not working
set routing-instances VLAN467 instance-type vpls
set routing-instances VLAN467 interface ge-0/0/0.467
set routing-instances VLAN467 protocols vpls encapsulation-type
ethernet-vlan
set routing-instances VLAN467 protocols vpls no-tunnel-services
set routing-instances VLAN467 protocols vpls vpls-id 467
set routing-instances VLAN467 protocols vpls ignore-mtu-mismatch
set routing-instances VLAN467 protocols vpls ignore-encapsulation-mismatch
set routing-instances VLAN467 protocols vpls neighbor 1.1.1.1

set interfaces ge-0/0/0 flexible-vlan-tagging
set interfaces ge-0/0/0 encapsulation extended-vlan-bridge
set interfaces ge-0/0/0 unit 467 vlan-id-list 1-4094
set interfaces ge-0/0/0 unit 467 input-vlan-map push
set interfaces ge-0/0/0 unit 467 output-vlan-map pop
set interfaces ge-0/0/0 unit 467 family ethernet-switching vlan members
VL467-TEST  (when apply this command, juniper srx300 does not allow us to
commit)

Does anyone here used to experience this issue? Could you please help to
advise how to get QinQ work with VPLS on Juniper 300? Many thanks for your
help in advance...

Kind regards,
Try Chhay