[j-nsp] MX204 Maximum Packet Rates
Andrey Kostin
ankost at podolsk.ru
Fri Jun 18 14:53:39 EDT 2021
It looks like "High performance mode" means configuring port speed in
pic mode that may not be feasible in all cases depending on port
configuration.
No data for HP mode provided...
And finally, from the example, where did they find fpc 5 on MX10003? ;)
Kind regards,
Andrey
aaron1 at gvtc.com писал 2021-05-21 13:54:
> Interesting, that KB link mentions...
>
> "From Junos 19.1R1, we support "High-performance mode" to enable WAN
> Output block resource allocation. In this mode, better throughput is
> achieved at line-rate traffic for small sized packets."
>
> Maybe this will help others and OP achiever higher rates
>
> -Aaron
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list