[j-nsp] QSA modules and DDM/DOM readings
David Sinn
dsinn at dsinn.com
Fri Mar 5 11:27:56 EST 2021
+1 on a MX10008 as well running 19.4R3.11 using the Mellanox QSA and a 3rd party optic.
Xcvr 1 NON-JNPR WFEXP96L176 SFP+-10G-LR
Physical interface: xe-0/4/1:0
Laser bias current : 39.946 mA
Laser output power : 0.6000 mW / -2.22 dBm
Module temperature : 19 degrees C / 66 degrees F
Module voltage : 3.2580 V
Laser receiver power : 0.7487 mW / -1.26 dBm
David
> On Mar 5, 2021, at 7:01 AM, Tarko Tikan <tarko at lanparty.ee> wrote:
>
> hey,
>
>> I tried QSAs from two different vendors but to no avail. I wonder if anyone has succeded in getting DDM/DOM readings on a QSA adapter. Is it the QFX5100-48T's fault or is it the QSA+SFP Modules that are at fault?
>
> Works fine on MX10k3 with 19.4R3-S1.3
>
> tarko at x> show interfaces terse xe-0/0/3*
> Interface Admin Link Proto Local Remote
> xe-0/0/3:0 up up
> xe-0/0/3:0.0 up up inet x/31
> inet6 x/64
> x/64
> multiservice
> xe-0/0/3:1 down down
> xe-0/0/3:2 down down
> xe-0/0/3:3 down down
>
> tarko at x> show chassis hardware | match OPCPCH16140148
> Xcvr 3 A01 A NON-JNPR OPCPCH16140148 SFP+-10G-ZR
>
> tarko at x> show interfaces diagnostics optics xe-0/0/3:0
> Physical interface: xe-0/0/3:0
> Laser bias current : 70.504 mA
> Laser output power : 1.5650 mW / 1.95 dBm
> Module temperature : 28 degrees C / 82 degrees F
> Module voltage : 3.3020 V
> Laser receiver power : 0.1870 mW / -7.28 dBm
>
>
> --
> tarko
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list