[j-nsp] QSA modules and DDM/DOM readings

[Karl Gerhard]

Hello,

thank you very much Tarko, David and Tobias for your helpful replies. I learned something again today.

Regards
Karl

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
*From:* Tobias Heister [mailto:lists at tobias-heister.de]
*Sent:* Friday, March 5, 2021, 6:00 PM
*To:* juniper-nsp at puck.nether.net
*Subject:* [j-nsp] QSA modules and DDM/DOM readings

> Hi,
>
> Am 05.03.2021 um 15:49 schrieb Karl Gerhard:
>> I tried QSAs from two different vendors but to no avail. I wonder if anyone has succeded in getting DDM/DOM readings on a QSA adapter. Is it the QFX5100-48T's fault or is it the QSA+SFP Modules that are at fault?
>
> QFX5100 is not listed to officially support the QSA: https://apps.juniper.net/hct/model/?component=MAM1Q00A-QSA&tab=sPlatforms
> Even on QFX5110 it was added as late as 19.4
>
> While the QSA probably did work even before (never tried it in the QFXes) its likely that Code for DOM readings and such might not be in there on that platforms or in your release.
>