[j-nsp] MX204: 802.3ad LAG 2 x 1 G with a Palo Alto firewall

[Benjamin Collet]

Hi Emmanuel,

On Thu, Mar 18, 2021 at 12:30:08PM +0100, Emmanuel Halbwachs wrote:
> The LAG is seen UP on the MX204 but DOWN on the firewall.

>From your configuration it seems that you did not enable LACP, but only
did a link aggregation, that might not be what your firewall is
expecting.

To actually enable LACP you would need the following statement:
  set interfaces ae0 aggregated-ether-options lacp active

Cheers,
Benjamin

-- 
Benjamin Collet