[j-nsp] VRRP for IPv6

[Peter Sievers]

Hi,


On 26.01.22 00:19, Chris Adams via juniper-nsp wrote:
> Still don't see any incoming v6 VRRP from the other router.  I also
> checked on a host on the VLAN and only see the v4 VRRP, not the v6.


You may have hit the following PR. PR1449014 ([vMX] Different MAC 
address used for IPv6 in VRRP[3].
MX150 is based on vMX plus x86 & BRCDM, so this PR should also be 
relevant for MX150.
The actual problem was already solved with PR1351981,
unfortunately only for IPv4 VRRP MAC addresses.

.peter