[j-nsp] Updating SRX300, now slower than before

[Andrey Kostin]

Have nothing directly related to these releases, but we have a few 
SRX320 and they always felt slow in comparison to SRX345 that we also 
use mainly for power supply redundancy. Now they are all on 19.4R3-Sx. 
320s time to time log LACP timeouts and ae interface flaps. 345s have 
the same configuration and never experienced anything like this.

Kind regards,
Andrey

Markus via juniper-nsp писал(а) 2022-07-12 17:16:
> Hi list,
> 
> I'm moving a couple SRX300 that were running 15.1X49-D90.7 to a new
> purpose and just updated them to 21.3R1.9 to be a bit more up-to-date
> and now booting takes twice the time (5 mins?) and CLI input also
> seems "lag-ish" sometimes. Did I just do a big mistake? If
> routing/IPsec is unimpacted then it's OK, or could it be that the
> SRX300 will now perform slower than before in terms of routing
> packets/IPsec performance/throughput? Or is that stupid of me to
> think? :)
> 
> Thank you!
> 
> Regards
> Markus
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp