[j-nsp] Multirate SFP+ in EX?

[Chris Adams]

Looks like there's no "set chassis pic ..." anything on this.  The only
thing close, "set chassis fpc 0 pic 0 ..." is for turning the modular
PIC (like on the EX4200) between 1G and 10G mode, but not individual
ports.

Once upon a time, Chuck Anderson <cra at fea.st> said:
> Not sure, but if there is a way, it might be configured under "set chassis pic ...", perhaps something like this:
> 
> sst chassis pic fpc-slot 0 pic-slot 1 port 0 speed 10g
> 
> 
> On Mon, Feb 13, 2023 at 09:23:10AM -0600, Chris Adams via juniper-nsp wrote:
> > I have an old Juniper EX4500 (working on replacing it), and some
> > FiberStore 10G/1G SFP+ modules (SFP-10GSR-85).  When I put the SFP+ in
> > the EX, it sees it as a 1G module (so interface ge-0/0/X), but the other
> > end is 10G.  Is there a way to force the EX end to 10G with the
> > multirate SFP+?  I see set ether-options speed, but it'll only go to 1g
> > on the ge-foo interface; I can set xe-foo ether-options speed 10g but it
> > is ignored (since the EX doesn't think it has an xe-foo interface).
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

-- 
Chris Adams <cma at cmadams.net>