[j-nsp] Junos 21+ Killing Finger Muscle Memory...

[Mark Tinka]

On 7/12/23 11:12, Chris Kawchuk wrote:

> +1 Mark!

For transparency, it was Chris who gave me the nudge, so thanks for 
that, mate :-).


> As any good problem begs for a solution, my suggestions to JNPR are as follows, as alternative places for this command:
>
> "show route transport-class ..." (or really, is it even a routing thing? might be better w/the segment-routing or spring commands)i.e.:
> "show segment-routing ..."
> "show spring transport-class ....."
>
> ...but whatever is done, please, for the love of 20+ years of finger-memory.... please do NOT make it conflict with "sh[TAB] rou[TAB]"

The other option that came to mind is - they could make it part of the 
BGP or MPLS command set, as it is specific to those features.


> - CK.
>
> (P.S. NOTE that since this new 'show' command is part of base JunOS 21 and above; it's also present on all EX, QFX, SRX, etc.. devices you would never ever think of ever running segment-routing on w/transport classes or colours, but that *do* have a basic routing table, so it's not just on PTX/ACX/EVO or MX/P/PE devices we run into this...)

The beauty of "One Junos to rule them all" :-).

Mark.