[j-nsp] Juniper MX240-40G License required?

[Ian Couch]

Hello,
you will not require a license. We have a few of these and the only license
we've had to apply is the subscriber license for BNG function, which you
don't mention.  You might want to check into the type of NAT you want to
do, without an MS-MPC card your options are limited.

Ian

On Fri, Apr 28, 2023 at 3:15 PM Juan C. Crespo R. via juniper-nsp <
juniper-nsp at puck.nether.net> wrote:

> Hello Everyone
>
>
>      We're wondering if we get a second hand Router with this config, we
> would need some kind of license ? it will be intended in using for
> routing, ospf, BGP, and possibly NAT
>
>   *
>
>
>       MX240BASE
>
>   *
>
>
>       MIC3-3D-2X40GE-QSFPP
>
>   *
>
>
>       MX-MPC3E-3D MPC3
>
> Thanks!
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>

-- 


This email and any files transmitted with it are confidential and 
intended solely for the use of the individual or entity to whom they are 
addressed. If you have received this email in error please notify the 
system manager. This message contains confidential information and is 
intended only for the individual named. If you are not the named addressee 
you should not disseminate, distribute or copy this email. Please notify 
the sender immediately by e-mail if you have received this email by mistake 
and delete this e-mail from your system. If you are not the intended 
recipient you are notified that disclosing, copying, distributing or taking 
any action in reliance on the contents of this information is strictly 
prohibited.