<html>
Bageshri,<br>
<br>
type 0x8503 is really the Fault Tolerant TLV (503) with the TLV's U-bit
set... hence 0x8503.<br>
<br>
So the juniper router is probably configured with [edit routing-options
graceful-restart].<br>
<br>
However, since the U-bit for that TLV is set, your test gear should just
silently disregard it<br>
and process the Init message as if that TLV didn't exist...<br>
<br>
See section 3.3 of the ldp rfc (3036) for more info on ldp TLV formats
and expected interpretation of the U-bit.<br>
<br>
chris<br>
<br>
At 11:25 AM 1/7/2004 -0800, bageshri kundu wrote:<br>
<blockquote type=cite class=cite cite>Hi,<br>
<br>
I am trying run some LDP conformance tests against a Juniper M10(Junos
6.0) on Ethernet interfaces. The basic tests fail because of the
Initialization message sent by Juniper contains the standard CSP TLV
& then an unknown TLV(type 0x8503) with some 14 bytes after it. I
have not been able to figure out what this tlv is. It will be helpful if
anyone could help me with this.<br>
<br>
Thank you,<br>
Bageshri<br>
<br>
<br>
Do you Yahoo!?<br>
Yahoo! Hotjobs:
<a href="http://pa.yahoo.com/*http://us.rd.yahoo.com/hotjobs/mail_footer_email/evt=21482/*http://hotjobs.sweepstakes.yahoo.com/signingbonus">Enter
the "Signing Bonus" Sweepstakes</a> <br>
_______________________________________________<br>
juniper-nsp mailing list juniper-nsp@puck.nether.net<br>
<a href="http://puck.nether.net/mailman/listinfo/juniper-nsp" eudora="autourl">http://puck.nether.net/mailman/listinfo/juniper-nsp</a></blockquote></html>