<html>
<head>
</head>
<body>
Hi,<br>
<br>
Juniper E3 works in clear channel mode by default. While, Cisco PA-E3 works
in Digital-link mode by default.<br>
<br>
There is one way to connect Juniper E3 to a Cisco PA-E3 using DSU mode of
Digital-link.<br>
<br>
At Juniper side:<br>
Configure PA-E3 to work in Digital-link mode with subrating of 33.7 Mbps<br>
<br>
At Cisco side:<br>
Configure PA-E3's DSU bandwidth = 33700 kbps <br>
<br>
I am sure it will help you.<br>
<br>
Thanks,<br>
KK Verma<br>
<br>
<br>
Lars Erik Gullerud wrote:<br>
<blockquote type="cite" cite="mid:1074675942.25639.404.camel@callisto.noc.catch.no">
<pre wrap="">On Tue, 2004-01-20 at 17:55, Alexandre Abreu wrote:<br><br></pre>
<blockquote type="cite">
<pre wrap="">Anyone successfully tried to connect a Juniper PE-2E3 PIC to a Cisco<br>PA-2E3 using a DSU mode other than kentrox? I'm targetting the use of<br>digital link dsu mode (no subrate) but it doesn't work well. The link<br>comes up, but there's a lot of packet loss. I've tried all<br>combinations for clock sources, scrambling modes, ... but can't seem<br>to get it to work properly.<br></pre>
</blockquote>
<pre wrap=""><!----><br>We have tried that and experienced the same problems you are describing<br>(lots of errors on the interface). By playing around with various<br>e3-options it got somewhat better (I seem to remember we needed to set<br>the "e3-options idle-cycle-flag ones" among other things), but since it<br>seems like Cisco and Juniper have a different opinion on "Digital Link"<br>mode, we gave up playing around with it and just went with using Kentrox<br>mode ("dsu mode 1" on the Ciscos) everywhere, since that works fine.<br><br>/leg<br><br><br>_______________________________________________<br>juniper-nsp mailing list <a class="moz-txt-link-abbreviated" href="mailto:juniper-nsp@puck.nether.net">juniper-nsp@puck.nether.net</a><br><a class="moz-txt-link-freetext" href="http://puck.nether.net/mailman/listinfo/juniper-nsp">http://puck.nether.net/mailman/listinfo/juniper-nsp</a><br></pre>
</blockquote>
<br>
</body>
</html>