<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>Dear Martin and Group,</p>
<p>Thanks so much for this great job that you are doing!<br>
</p>
<p><br>
</p>
<p>In Barbados we are willing and eager to receive the kit for
Dominica for further transshipment it via our military's relief
shipments channel.</p>
<ol>
<li>We have already managed to use to same channel to get
essential supplies directly to our ISOC Dominica counterparts.
Thus, it is a tested and working channel. Our Dominican
counterparts are looking forward to receiving the kit. They
still have IP communications challenges that it may help them
improve upon.<br>
</li>
<li>We are concerned that the relief shipment window is not
necessarily indefinite, so we would like to use it whilst we
can.</li>
</ol>
<p><br>
</p>
<p>Is there a way that we may assist more from Barbados? <br>
</p>
<ol>
<li>I think we are nearly in a state where we can perform some
systems administration and distribution of some of these kits as
well, if they were in Barbados.</li>
<li>If everything is preceding normally we also wanted to reach
out to Tortola to find persons we could deploy a kit. We need to
know what is possible before we attempt cold contact with the
persons from Tortola.</li>
</ol>
<p>----</p>
<p>I've cc'ed my ISOC Barbados working group which is assisting with
this project on the local end and helping to keep me organised.<br>
</p>
<p><b><br>
</b></p>
<p><b>Have a great day!<br>
</b></p>
<p><b><br>
</b></p>
<p><b>CC:</b> ISOC BB - Disaster Management Working Group</p>
<p><br>
</p>
<p>Regards,</p>
<p>Jason Hynds<br>
</p>
<br>
<div class="moz-cite-prefix">On 10/15/2017 11:46 AM, Martin Hannigan
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CAMDXq5MmbfYz0nDqp=70jAtNYjB8ZntUhOruvRhVVChEC_TK9Q@mail.gmail.com">
<div dir="ltr">
<div>
<div><br>
<br>
</div>
I also built a RPi with a recursive name server and
piggybacking a RIPE atlas probe. That gives us a remote access
platform and measurements/up/down. We can lock the name server
to the local ISP allocations I suppose.<br>
<br>
</div>
The last question I have is: Does CW have a working port with
DHCP anywhere in Dominica?<br>
<br>
<br>
</div>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Sun, Oct 15, 2017 at 11:43 AM,
Martin Hannigan <span dir="ltr"><<a
href="mailto:hannigan@gmail.com" target="_blank"
moz-do-not-send="true">hannigan@gmail.com</a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">
<div>
<div>
<div>
<div><br>
</div>
Chris, <br>
<br>
</div>
Here's the config. I'm working on buttoning down the
edge router now. I have the everything running from an
ethernet port on my home internest service with a DHCP
address from my provider. <br>
<br>
</div>
I have all three radios connected and reachable. Looks
like the lack of server disable some functionality, but
the rest is there. I couldn't figure out manual channel
seperation. Of note, the AP's themselves will QoS
connections. Maybe simpler to limit their and replace
the edgemax with something much dumber and cheaper.<br>
<br>
</div>
I think we leave it "open" on shipping. This is not fancy
by any means, and I'm wondering how much more we really
need.<br>
<br>
!<br>
!<br>
username Cisco password 7 062506324F41<br>
!<br>
!<br>
bridge irb<br>
!<br>
!<br>
!<br>
interface Dot11Radio0<br>
no ip address<br>
!<br>
ssid LIFELINE<br>
!<br>
antenna gain 0<br>
station-role root<br>
bridge-group 1<br>
bridge-group 1 subscriber-loop-control<br>
bridge-group 1 spanning-disabled<br>
bridge-group 1 block-unknown-source<br>
no bridge-group 1 source-learning<br>
no bridge-group 1 unicast-flooding<br>
!<br>
interface GigabitEthernet0<br>
no ip address<br>
duplex auto<br>
speed auto<br>
bridge-group 1<br>
bridge-group 1 spanning-disabled<br>
no bridge-group 1 source-learning<br>
!<br>
interface BVI1<br>
mac-address 649e.f38e.f718<br>
ip address dhcp client-id GigabitEthernet0<br>
ipv6 address dhcp<br>
ipv6 address autoconfig<br>
ipv6 enable<br>
!<br>
ip forward-protocol nd<br>
ip http server<br>
no ip http secure-server<br>
ip http help-path <a
href="http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag"
target="_blank" moz-do-not-send="true">http://www.cisco.com/warp/<wbr>public/779/smbiz/prodconfig/<wbr>help/eag</a><br>
!<br>
!<br>
bridge 1 route ip<br>
!<br>
!<br>
!<br>
line con 0<br>
line vty 0 4<br>
login local<br>
transport input all<br>
!<br>
end<br>
<br>
<br>
<br>
<br>
<br>
<br>
</div>
</blockquote>
</div>
</div>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
ndr mailing list
<a class="moz-txt-link-abbreviated" href="mailto:ndr@puck.nether.net">ndr@puck.nether.net</a>
<a class="moz-txt-link-freetext" href="https://puck.nether.net/mailman/listinfo/ndr">https://puck.nether.net/mailman/listinfo/ndr</a>
</pre>
</blockquote>
<div class="moz-signature">-- <br>
</div>
</body>
</html>