[Outages-discussion] [outages] Equinix CH1 Overheating

[Josh Luthman]

In the context where they are just blowing down the aisle, one duct from
outside to that aisle would be an alternative.

In the context where there are "better" paths for air to travel, use the
existing ductwork.

On Mon, Jan 15, 2024 at 9:13 PM Chris Adams via Outages-discussion <
outages-discussion at outages.org> wrote:

> Once upon a time, Josh Luthman <josh at imaginenetworksllc.com> said:
> > The same ductwork that the chillers/compressors are using could be
> utilized
> > by outside cold air.  You will have to have a second fan, filter, etc.
> yes.
>
> In at least some places, there is not much ductwork - the chillers are
> connected to air handlers at the end of the row, blowing down the aisle.
> I haven't been to 350 Cermak (we had equipment there but on another
> floor, and I never visited there anyway), so don't know the setup.
>
> --
> Chris Adams <cma at cmadams.net>
> _______________________________________________
> Outages-discussion mailing list
> Outages-discussion at outages.org
> https://puck.nether.net/mailman/listinfo/outages-discussion
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/outages-discussion/attachments/20240115/75b6744d/attachment.htm>