[rbak-nsp] pppoe - session limit ?

[Yuri Schefer]

As I know, the subscriber active/bandwidth licenses are required for
termination of subs.

On Tue, Apr 15, 2008 at 5:54 PM, Marcin Kuczera <marcin at leon.pl> wrote:
>
> > Try to use "pppoe circuit padr per-mac" command and increase limit of
> > PADR. Bu default, "the PPPoE session limits the outstanding PADR
> > message count to 1 for each MAC address until it receives a PPPoE
> > Active Discovery Session (PADS) reply for that session."
> >
> > Maybe, this info will be helpful to you.
> >
>
>  nope, doesn't work ;(
>
>  I am connecting from 2 different devices, one is linksys IP Phone, and the
> second
>  is my laptop so 2 different MAC addresses.
>
>  Little hint, the licensing looks like "NO" for all:
>  [voip1]RedBack_SE100(config)#show licen all
>   Software Feature            License Configured
>  --------------------------    ------------------
>  subscriber dynamic-service          NO
>  l2tp                                NO
>  mpls                                NO
>  subscriber high-availability        NO
>  subscriber active                   NO
>  subscriber bandwidth                NO
>  lawful-intercept                    NO
>  [voip1]RedBack_SE100(config)#
>
>  however, I was told that this is just for support, so if I want to make
> tests, this should work properly with no limitations..
>
>  I hope that this was not another marketoid trick..
>
>  Regards,
>  Marcin Kuczera