[rbak-nsp] OSPF between FreeBSD and SE100

[Marcin Kuczera]

hello,

I have a problem with OSPF between SE100 and FreeBSD.
Before, there was FreeBSD(openospfd)--Linux(quagga) working fine.

FreeBSD:
#########
wan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
        ether 00:15:17:25:f6:5d
        inet6 fe80::215:17ff:fe25:f65d%wan0 prefixlen 64 scopeid 0x1
        inet 195.66.73.174 netmask 0xfffffff8 broadcast 195.66.73.175
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active

################
router-id 195.66.73.174

redistribute connected
redistribute static

area 0.0.0.0 {

    interface wan0 {
        metric 21
    }
}

################

PORTNAME=       openospfd
PORTVERSION=    4.0
PORTREVISION=   2

################

[root at atu /usr/ports/net/openospfd]# ospfctl show nei
ID              Pri State        DeadTime Address         Iface     Uptime
91.195.159.129  1   EXSTA/DR     00:00:37 195.66.73.169   wan0      -

#########

and from log:
May  1 20:12:33 atu ospfd[92550]: nbr_adj_timer: failed to form adjacency 
with 91.195.159.129
May  1 20:13:33 atu ospfd[92550]: nbr_adj_timer: failed to form adjacency 
with 91.195.159.129

RedBack
SE100 SEOS-6.1.1.4-Release

##############
!
 router ospf 1
  router-id 91.195.159.129
  originate-default always
  area 0.0.0.0
   interface vlan2502
   interface vlan150
   interface vlan415
  redistribute connected
  redistribute static
!
##############

bgp1]RedBack_SE100#show ospf nei

  --- OSPF Neighbors for Instance 1/Router ID 91.195.159.129 ---

NeighborID      NeighborAddress Pri State    DR-State IntfAddress 
TimeLeft
195.66.73.174   195.66.73.174   1   ExStart  BDR      195.66.73.169   39
195.66.73.250   195.66.73.250   1   Full     DR       195.66.73.249   39
195.66.73.254   195.66.73.254   1   Full     DR       195.66.73.253   32
[bgp1]RedBack_SE100#

##############

[bgp1]RedBack_SE100#May 1 19:56:43: [0002]: %OSPF-7-NEIGHBOR: OSPF-1: 
195.66.73.174 EVENT: 2 Way STATE: 2-Way
May 1 19:56:53: [0002]: %OSPF-7-NEIGHBOR: OSPF-1: 195.66.73.174 EVENT: 2 Way 
STATE: 2-Way
May 1 19:56:53: [0002]: %OSPF-7-NEIGHBOR: OSPF-1: Neighbor 195.66.73.174 
change from <2-Way> to <ExStart>
May 1 19:56:53: [0002]: %OSPF-7-NEIGHBOR: OSPF-1: Number of exchanging 
neighbors increased to 1 global: 1
May 1 19:56:53: [0002]: %OSPF-7-NEIGHBOR: OSPF-1: NBR 195.66.73.174 - is 
Master in exchange
May 1 19:57:43: [0002]: %OSPF-7-NEIGHBOR: OSPF-1: 195.66.73.174 EVENT: No 
Exchange Progress STATE: ExStart
May 1 19:57:43: [0002]: %OSPF-7-NEIGHBOR: OSPF-1: Neighbor 195.66.73.174 
change from <ExStart> to <2-Way>
May 1 19:57:43: [0002]: %OSPF-7-NEIGHBOR: OSPF-1: Number of exchanging 
neighbors decreased to 0 global: 0

###################

Any idea how to make them working together ?

Regards,
Marcin