[rbak-nsp] rflow - something wrong ?

[Marcin Kuczera]

hello,

I'am testing rflow on my SE100 (6.1.4.1.p4).

something is not working, I mean, there are no packets sent towards 
collector.

this is my config:
!
flow ip profile test
  active-timeout 15
  aggregation-cache-size 1024
!
context local
!
  flow collector noc
   ip-address 10.100.10.20 context local
   port 9997
   export-version v5
   transport-protocol udp
   ip profile test
!
  interface vlan1
   description o&m
   ip address 10.100.10.56/20
    ip source-address ipfix
  logging console
!
!
port ethernet 1/1
! XCRP management port on slot 1
  no shutdown
  bind interface vlan1 local
!
!
port ethernet 2/4
  no shutdown
  encapsulation dot1q
  dot1q pvc 203
   mac-address 00:00:10:ff:00:01
   flow apply ip profile test both
   bind interface downstream sgt-tv
!


If you could just verify if there is something missing maybe...
Debug sends a lot of output, but I have no idea which is important.

I have a lot of multicast traffic on dot1q pvc 203


Regards,
Marcin