[rbak-nsp] Subnet mask and default gateway for CLIPS from

[Илья Савин]

Nearest to redback switch, witch acts as DHCP-Relay, also acts as router for
subscribers. Traffic between all clients routed by this routing switch, and
internet traffic goes to RedBack. Each /24 subnet is in own VLAN, routing
switch has IP in each VLAN, this IP is the default gateway for clients in
this VLAN.
 
I don't want to steer all traffic to one client :)
I'm used Framed-Route = "0.0.0.0 188.116.130.253 1" trying set default
gateway to 188.116.130.253. I don't find any other radius attributes to set
default gateway.
 
 
>Just out of interest, why would you want to do this?
> 
>Do you mean:
> 
>A. Enable the client to have internet access through your redback (via
>your network) -> then this framed route is not required, this is the
>default IPCP behaviour.
> 
>or
> 
>B. Steer ALL traffic from your network through this one subscriber
>in which case you would need:
> 
>  Framed-IP-Address = 188.116.130.99
> 
>  Framed-IP-Netmask = 255.255.255.0
> 
>  Framed-Route = "0.0.0.0 0.0.0.0 188.116.130.99 1"
> 
>Dave.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20090619/c1404c0d/attachment.html>