[rbak-nsp] rate limit

[Илья Савин]

Hi Rob!

Now its works! Thanks!! :)

>Hi Ilya,
>
>On Thu, May 28, 2009 at 7:26 PM, Илья Савин <savin at orn.ru> wrote:
>
>> qos policy inet metering radius-guided
>>  rate 1000 burst 100 counters
>>  access-group SERVICE_out local
>>  class SERVICE1
>
>It looks like the burst values you are using are too small.  As a
>starting point try using a burst setting of:
>
>rate / 8 * 1500
>
>So for a 1Mbps rate you would have:
>
>1000 / 8 * 1500 = 187500
>
>Use this as a starting figure only - you'll need to adjust it based on
>the traffic profile of the subscribers and whether or not you are more
>concerned about going over or under speed.
>
>Cheers,
>
>Rob

Best regards, 
Ilya Savin.