[rbak-nsp] Re-authorize subscriber via snmp

David Freedman david.freedman at uk.clara.net
Mon Apr 5 09:47:37 EDT 2010


So nothing changes between the outputs of "show subscribers active username
<username>" ?

Usually, if you are going to reauthorise a user and some new attributes will
not be applied, they show up here.

Is there a need to change the entire profile? Are you changing  many
attributes or just one?

Dave.



On 05/04/2010 14:22, "serstor" <serstor at sinet.ru> wrote:

> HI!
> Which way I must  configure RedBack to make re-authorize work's via
> snmp.  I do snmpset -v2c -c community_word at contex Redback_IP
> .1.3.6.1.4.1.2352.2.27.1.1.3.7.0 s "username" . Result:
> SNMPv2-SMI::enterprises.2352.2.27.1.1.3.7.0 = STRING: "username". RADIUS
> returns new value of Sub-Profile-Name to RedBack, but nothing changes in
> active session of user.
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp


------------------------------------------------
David Freedman 
Group Network Engineering
Claranet Limited
http://www.clara.net




More information about the redback-nsp mailing list