[rbak-nsp] Source interface for outgoing packets.

[Илья Савин]

Denis, Davin, thanks, guys! That's what I need :)

WBR,
Ilya Savin.

2010/4/17 Denis Mikhaylovskiy <denis.mikhaylovskiy at ericsson.com>:
> Hi
>
> Would this help ?
>
> [local]se100(config-if)#ip source-address ?
>  all                    Configure source-interface for all applications
>  dhcp-server            Configure source-interface for dhcp server.
>  flow-ip                Configure source-interface for rflow
>  ftp                    Configure source-interface for ftp
>  icmp-dest-unreachable  Configure source-interface for icmp-dest-unreachable
>  icmp-time-exceed       Configure source-interface for icmp-time-exceed
>  netop                  Configure source-interface for netop
>  radius                 Configure source-interface for radius
>  snmp                   Configure source-interface for snmp
>  ssh                    Configure source-interface for ssh/sftp/scp
>  syslog                 Configure source-interface for syslog
>  tacacs+                Configure source-interface for tacacs+
>  telnet                 Configure source-interface for telnet
>  tftp                   Configure source-interface for tftp
>  <cr>
>
>
> /denis
>
> -----Original Message-----
> From: redback-nsp-bounces at puck.nether.net [mailto:redback-nsp-bounces at puck.nether.net] On Behalf Of Илья Савин
> Sent: Saturday, April 17, 2010 2:27 PM
> To: Christopher O'Shea
> Cc: redback-nsp
> Subject: Re: [rbak-nsp] Source interface for outgoing packets.
>
> Hi Chris!
>
> Ping is just an example. I want to select source IP for ALL oungoing
> packets: RADIUS requests, ICMP replies for traceroute (TTL exceeded)
> etc.
>
> WBR,
> Ilya Savin.
>
>
>
> 16 arp 2010 г. 18:37  Christopher O'Shea <casper.oshea at gmail.com> wrote:
>> Hi,
>>
>> [local]Router#ping
>> Target IP address:  ya.ru
>> Repeat count [5]: 100
>> ICMP datagram size [36]: 36
>> Timeout in seconds [1]: 1
>> Extended commands [n]: y
>> Source IP address: 80.76.178.8
>>
>> But the source IP has to be an Interface (not sure if it limited to an
>> interface in that context or not) but its worth a try.
>>
>>
>> Chris O'Shea
>>
>>
>>
>>
>> On Fri, Apr 16, 2010 at 2:07 PM, Илья Савин <savin at orn.ru> wrote:
>>> Hi!
>>>
>>> How can I choose source interface for outgoing packets, which are
>>> routed via other context?
>>>
>>> For example, config:
>>>
>>>
>>> [homenet]Redback#sh conf int
>>> Building configuration...
>>>
>>> Current configuration:
>>> !
>>> !
>>> context homenet
>>> !
>>> interface _main loopback
>>>  ip address 80.76.178.8/32
>>> !
>>> interface dhcp_int multibind
>>>  ip address 188.116.128.1/18
>>>  ip address 172.17.0.1/16 secondary
>>>  dhcp server interface
>>> !
>>> interface to-qtech
>>>  ip address 80.76.176.110/28
>>>  ip access-group def in
>>>  ip access-group def out
>>> !
>>> ! ** End Context **
>>> !
>>> end
>>>
>>> [homenet]Redback#sh conf static
>>> Building configuration...
>>>
>>> Current configuration:
>>> !
>>> !
>>> context homenet
>>> !
>>>  ip route 0.0.0.0/0 context bgp
>>> !
>>> ! ** End Context **
>>> !
>>> end
>>>
>>>
>>> [homenet]Redback#ping ya.ru
>>> PING ya.ru (213.180.204.8): source 80.76.176.110, 36 data bytes,
>>>
>>> Packets sent from IP 80.76.176.110, but i want to packets sent from IP
>>> 80.76.178.8.
>>>
>>> WBR,
>>> Ilya Savin.
>>>
>>> _______________________________________________
>>> redback-nsp mailing list
>>> redback-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/redback-nsp
>>>
>>
>
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp
>