[rbak-nsp] Internal QoS markings

Mariano Juliá mjuliaq at gmail.com
Thu Feb 18 11:45:56 EST 2010

Hi Dave,

Although I haven't tried your specific setup, it should work.

I have been using the "propagate qos" for DSCP, EXP and .1p successfully for
a number of years now.

Be aware that most of the features are poorly documented or not documented
at all.

Hope this helps.



On 18 February 2010 12:23, David Freedman <david.freedman at uk.clara.net>wrote:

> Was thinking of using the internal QoS markings to copy DSCP from
> subscriber payload to the tunnel header but the tunnels originate in another
> context,
> should be able to do this with "propagate qos from ip" and "propagate qos
> to l2tp" in sub profile and l2tp peer respectively but concerned that these
> markings may
> get lost when user's packet has to travel between PPAs. Perhaps I'm just
> confusing this with the "not being able to do per-sub qos when using an lns
> card group" issue (see earlier posts from me)
> so anybody doing this and it working between multiple linecards, a simple
> "it works" would be much appreciated!
> Dave.
> ------------------------------------------------
> David Freedman
> Group Network Engineering
> Claranet Limited
> http://www.clara.net
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20100218/1d9a2ad7/attachment.html>

More information about the redback-nsp mailing list