[rbak-nsp] SE400 link aggregation problem with load balancing

[Frans Legdeur]

Hi Elma,

Do you by any change use the same IP address as destination and/or source?
The way the balancing works is based on something like source IP plus
destination IP plus destination port, that will stick to the same physical
link.
I ran into this problem once, solved the test by adding another source 1 IP
address higher and that took another link.

I don¹t know if you have the same kind of trouble there.

Kind regards,


Frans.



From: "Elma K." <elmicak at hotmail.com>
Date: Wed, 20 Jan 2010 14:57:15 +0000
To: <redback-nsp at puck.nether.net>
Subject: [rbak-nsp] SE400 link aggregation problem with load balancing

Hello.

I have SE400 connected to other device, and I have configured link
aggregation on SE400,
everything works fine except load-balancing from Redback's side...
Traffic that is going from redback is not balanced on link group members, it
is gong only on one port.

I guess there must be some configuration to change the way the device is
doing this load balancing
between group members.

My device is with SEOS-2.6.7 (no chance for upgrade, unfortunately)
and the config is like this:

link-group hsiUplink-2PCh ether
 bind interface uplink-2 hsi

port ethernet 1/5
 link-group hsiUplink-2PCh
!
port ethernet 1/7
 link-group hsiUplink-2Ch
!
port ethernet 3/12
 link-group hsiUplink-2PCh
!

Could anyone help me, please?

Best Regards.
Elma
       

Windows Live:  Friends get your Flickr, Yelp, and Digg updates when they
e-mail you. 
<http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/so
cial-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_3:092010
> 

_______________________________________________
redback-nsp mailing list
redback-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/redback-nsp

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20100120/0f657bc6/attachment.html>