[rbak-nsp] Load Balancing Between Cisco and Redback

[David Freedman]

What version of SEOS are you running?
 
>From what I understand, ECMP is a relatively new feature (and yes, this
surprised me as well)
 
David.

> 
> 
> On 11/07/2010 11:29, "Alireza Soltanian" <soltanian at gmail.com> wrote:
> 
>> Hi all
>> 
>> I have a Cisco 7200 VXR and SE-100. I want to perform Equal Cost
>> load-Balancing between these routers via OSPF or Static route. I tried a lot
>> but it seems it does not work. With Investigation the problem, I found out
>> the Cisco router actually performs the load balancing on both links in
>> output direction and sends the traffic Per-Packet(with configuration under
>> the interface) but in return, Redback sends the traffic on one link only,
>> although there are two equal active routes in the routing table of Redback.
>> If the interfaces are configured per-destination load-sharing on Cisco then
>> the traffic is sent via one link and received from another link.
>> 
>> Is there any idea about this?
>> 
>> Alireza
>>  
>> 
>> __________ Information from ESET NOD32 Antivirus, version of virus signature
>> database 5268 (20100710) __________
>> 
>> The message was checked by ESET NOD32 Antivirus.
>> 
>> http://www.eset.com
>>  
>> 
>> _______________________________________________
>> redback-nsp mailing list
>> redback-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/redback-nsp

 -- 
 
 David Freedman
 Claranet 
 http://www.clara.net

------ End of Forwarded Message