[rbak-nsp] Link Group

[Frans Legdeur]

Dear Brent,

This should do the job:

First create a link group: ! link-group uplink1 dot1q dot1q pvc 11  bind
interface inet inet maximum-links 2 !
The link group is you new interface that the bundle will use, then attach
real ports to the link group: ! port ethernet 2/1 no shutdown encapsulation
dot1q link-group uplink1 ! port ethernet 2/2 no shutdown encapsulation dot1q
link-group uplink1 !

If you need 802.1q support, you have to create the link group according to
that, also the encap on the real ports must match that.

Kind regards,


Frans.


From: Brent <brent at ubtanet.com>
Date: Wed, 3 Nov 2010 11:26:34 -0600
To: <redback-nsp at puck.nether.net>
Subject: [rbak-nsp] Link Group

Does anyone know if it¹s possible to create link groups that span multiple
³like² cards in the SE400?  Running SEOS-6.1.3.8 if that helps.  Ether cards
are the older ge-4-portŠ.GBIC version, controllers are xcrp3-base.
 
Thanks,
 
Brent


_______________________________________________
redback-nsp mailing list
redback-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/redback-nsp

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20101104/2d710711/attachment.html>