[rbak-nsp] Redback/Cisco Link-group

[fatih ayvaz]

Hi Brent,
 
Does the link-group come up? 
show link-group uplink1 detail
 
have you tried link-dampening command under etherhet port config?
 
Regards.
Fatih

--- On Thu, 1/27/11, Brent <brent at ubtanet.com> wrote:


From: Brent <brent at ubtanet.com>
Subject: [rbak-nsp] Redback/Cisco Link-group
To: redback-nsp at puck.nether.net
Date: Thursday, January 27, 2011, 1:30 PM






Having a very strange issue trying to configure a link-group for both access and uplink (dot1q) interfaces.  Everything comes up, but it’s like the routing tables disappears.  I can ping back and forth between the connected interfaces but not beyond.  Here is the relevant config:
 
 
context isp
!
interface isp0 multibind
  ip address 1.1.1.2/30
!
ip route 0.0.0.0/0 1.1.1.1
!
! ** End Context **
!
link-group ppp1 access
encapsulation dot1q
dot1q pvc on-demand 2000 through 2050 encapsulation pppoe
  idle-down 60
  bind authentication pap chap maximum 8000
maximum-links 8
lacp active
!
link-group uplink1 dot1q
dot1q pvc 4000
    bind interface isp0 isp
!
lacp active
!
port ethernet 1/1
description uplink
no shutdown
encapsulation dot1q
link-group uplink1
!
port ethernet 1/3
description ppp
no shutdown
encapsulation dot1q
link-group ppp1
!
 
Slot Type                 Serial No      Rev Ver Mfg Date    Voltage  Temp
---- -------------------- -------------- --- --- ----------- -------- -------
N/A  backplane            0A014070400419   1   4 11-SEP-2004 N/A      N/A
N/A  fan tray             0C014070400431   1   4 31-AUG-2004 N/A      N/A
N/A  alarm card           0D014080400428   1   4 11-SEP-2004 N/A      NORMAL
1    ge-4-port            8K505050502946  50   4 07-JUN-2005 OK       NORMAL
2    ge-4-port            8K505050503058  50   4 23-JUN-2005 OK       NORMAL
3    atm-oc3-4-port       9X505110400249  50   4 23-NOV-2004 OK       NORMAL
4    ge-4-port            8K505030502126  50   4 14-APR-2005 OK       NORMAL
5    xcrp3-base           6Y095110401823   9   4 30-DEC-2004 OK       NORMAL
6    xcrp3-base           6Y095110401768   9   4 29-DEC-2004 OK       NORMAL
 
Redback Networks SmartEdge OS Version SEOS-6.1.3.8p3-Release
Built by sysbuild at lx-dev1 Tue Apr 13 13:30:14 PDT 2010
Copyright (C) 1998-2010, Redback Networks Inc. All rights reserved.
System Bootstrap version is PowerPC,1.0b1272
Installed minikernel version is 23
Router Up Time -   3 hours 7 minutes 51 secs
 
 
 
All the links come up… from the SE400 I can ping the Cisco interface that is 1.1.1.1, but cannot ping beyond that.  If I remove the link-group config everything works.  I am missing something very stupid here or is something broke?
 
Thanks,
 
Brent
-----Inline Attachment Follows-----


_______________________________________________
redback-nsp mailing list
redback-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/redback-nsp



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20110127/e6554b10/attachment-0001.html>