[rbak-nsp] Link-Group Questions

[Yuri Shefer]

Hi,

Did you tried to use layer-4 balancing?

[local]Redback(config)#service load-balance ip layer-4

On Fri, May 13, 2011 at 7:54 AM, Michael J. Gage <mgage at localtel.net> wrote:
> I have two Redback SE800 routers, and I am using a 4 port link-group between
> them.
>
>
>
> Edge Router (hostname: Itt - SEOS-6.1.3.6-Release) using 2x XCRP3 & 4x
> ge-4-port.
>
> Subscriber Router (hostname: Thing - - SEOS-6.1.5.7p5-Release) using 2x
> XCRP4 & 1x ge-10-port.
>
>
>
> This issue is load-balancing across all 4 links. One direction I balance
> across all 4 and the other it only uses 2.
>
>
>
> Edge à Subscriber:
>
>   1. 1/3               (Up  )| 23.71%
>
>   2. 2/3               (Up  )| 19.89%
>
>   3. 3/3               (Up  )|  0.00%
>
>   4. 4/3               (Up  )|  0.00%
>
>
>
> Subscriber à Edge:
>
>   1. 1/7               (Up  )|  2.60%
>
>   2. 1/8               (Up  )|  1.85%
>
>   3. 1/9               (Up  )|  2.75%
>
>   4. 1/10              (Up  )|  2.25%
>
>
>
> Any thoughts?
>

-- 
Best regards,
Yuri