[rbak-nsp] Howto confgure bgp transit on SE 100

[David Freedman]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 10/10/11 08:12, Robert Lipiński wrote:
> I would like to set the transit of these two networks AS198072 AS198089
> One of my upstream uses the prefix-list but the second one uses the
> as-path, and I have set as-path but not really know how, I would ask for
> any suggestions regarding the proper transit of the SE 100 with firmware
> Version SEOS-6.4.1.3-Release

Robert,

am I right in thinking that you are asking how to configure your box to
provide transit for two asns, AS198072 and AS198089?

Dave.


>  
> Robert Lipiński       
> 
> 
> 
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp


- -- 

David Freedman
Group Network Engineering

david.freedman at uk.clara.net
Tel +44 (0) 20 7685 8000

Claranet Group
21 Southampton Row
London - WC1B 5HA - UK
http://www.claranet.com

Company Registration: 3152737 - Place of registration: England

All the information contained within this electronic message from
Claranet Ltd is covered by the disclaimer at
http://www.claranet.co.uk/disclaimer
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAk6VvLIACgkQtFWeqpgEZrJU8wCgtGoWyE2y8zR8KIWEVNISrItO
fKMAoLy3jLHVvRDzH1i9Ut7NQ5XdiA6d
=MHf+
-----END PGP SIGNATURE-----