[rbak-nsp] Problem with assigning static ip address with pppoe

[Tomas Lynch]

Robert,

It is assigning the first IP address available from 172.23.0.0/27, and that
is 172.23.0.2 because the problem is that you are using the wrong mask:
172.23.0.11/27 is the same as 172.23.0.0/27. If you want to assign exactly
172.23.0.11, then do not indicate the prefix length.

Tomás

2011/8/30 Robert Lipiński <rlipinski at derkom.pl>

> hello
> I question whether there is a possibility of granting permanent ip address
> for the PPPoE client.
> my config looks like this:
>
> subscriber name 1234
>   password 1234
>   ip address 172.23.0.11/27
>   ip route 10.10.8.1 subscriber
>   Policing policy qos-up wifi
>   qos policy-down metering wifi
>   nat policy-name NAT_policy
>   ppp mtu 1492
>   178.212.120.1 primary dns
>   213.199.225.14 secondary dns
> However, after logging a client gets an address from the pool next:
>
> 1234
>        Circuit 2 / 1 vlan-id 24 pppoe 17
>        Internal Circuit 2 / 1: 1023:63 / 6/2/17
>        Current port-limit unlimited
>        ip address 172.23.0.2 (applied)
>        0.0.0.0 10.10.8.1 ip route 172.23.0.2 (applied)
>        ppp mtu 1492 (applied)
>        dns 178.212.120.1 primary (applied)
>        213.199.225.14 dns secondary (applied)
>        Policing qos-policy-wifi-up (applied)
>        qos-policy-metering wifi-down (applied)
>        nat policy-name NAT_policy (applied)
>
> Interface configuration:
>  pppoe interface multibind
>  ip address 178.212.127.193/26
>  secondary ip address 10.10.8.1/24
>  secondary ip address 172.23.0.1/27
> Thank you in advance for any suggestions and additional information
>
>
>
> ______________________________**_________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/**mailman/listinfo/redback-nsp<https://puck.nether.net/mailman/listinfo/redback-nsp>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20110901/5c4218e1/attachment.html>