[rbak-nsp] Does any body know the equivalent command for track reachability as in CISCO

[Christopher O'Shea]

Hi Fai,

normally if the Next-hop not reachable then it will move to the next IP
listed.
Such in the example below if 1.1.1.1 isn't reachable (in the routing table)
then it will redirect it to 2.2.2.2, then if 2.2.2.2 not reachable then it
will going to the default (normal route look up)

config
forward policy redirect
redirect destination next-hop 1.1.1.1 2.2.2.2 default

Not sure if this like Cisco been a few years since i worked on Cisco.


Chris O'Shea



On Wed, Apr 18, 2012 at 7:56 PM, Ahmad Rifai <ahmad.rifai at gmail.com> wrote:

> Hi All,
> Does anybody know the equivalen command of next hop reachability tracking
> that used in PBR as in CISCO router ?
>
> Thx before,
>
> Regards,
>
> Fai
>
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20120418/514aa0ca/attachment.html>