[rbak-nsp] Link-group between SmartEdge to Cisco

[brent at ubtanet.com]

Here you go.

 

SE600

!

context test

!

interface int0

  ip address 1.1.1.1/30

!

link-group uplink access

encapsulation dot1q

dot1q pvc explicit 2000 through 2099 encapsulation pppoe 

  bind authentication pap chap maximum 16000

dot1q pvc 4011 

  bind interface int0 test

maximum-links 2

lacp active

!

card 10ge-1-port 1

!

port ethernet 1/1 

 description 7600-te8/2

no shutdown

encapsulation dot1q

link-group uplink

!

card 10ge-1-port 3

!

port ethernet 3/1 

 description 7600-te9/2

no shutdown

encapsulation dot1q

link-group uplink

!

 

Cisco 7600

!

interface Vlan4011

ip address 1.1.1.2 255.255.255.252

!

interface Port-channel6

description SE600

switchport

switchport trunk encapsulation dot1q

switchport trunk allowed vlan 2000-2099,4011

switchport mode trunk

!

interface TenGigabitEthernet8/2

description SE600-1/1

switchport

switchport trunk encapsulation dot1q

switchport trunk allowed vlan 2000-2099,4011

switchport mode trunk

no cdp enable

channel-group 6 mode active

!

interface TenGigabitEthernet9/2

description SE600-3/1

switchport

switchport trunk encapsulation dot1q

switchport trunk allowed vlan 2000-2099,4011

switchport mode trunk

no cdp enable

channel-group 6 mode active

!         

 

 

Brent

 

From: redback-nsp-bounces at puck.nether.net
[mailto:redback-nsp-bounces at puck.nether.net] On Behalf Of sun sunn
Sent: Tuesday, December 04, 2012 12:07 AM
To: redback-nsp at puck.nether.net
Subject: [rbak-nsp] Link-group between SmartEdge to Cisco

 

Hi Experts,

Created Link-group between SmartEdge and Cisco Router

Problem occured is : -  Link-group is up but ping is not happening

Can someone share the working configuration for the Link-group between
Cisco<---->Redback

Thanks

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20121204/5498f3f2/attachment.html>