[rbak-nsp] ether-12-port not functioning

[Navin Nepali]

The following are the details of the POD.
 
 
[ntc]htd_bras#show diag pod card 3 detail 
Slot Type                                                 POD status (Enabled)
---- --------------------------------                    ----------------------
3    none                                             
                                                      
     Card Type Valid                                              FAIL
[ntc]htd_bras#
[ntc]htd_bras#
 
 
 
What may be the issue?


________________________________
From: Marcin Kuczera <marcin at leon.pl>
To: Navin Nepali <navin_n at yahoo.com> 
Cc: "denis.mikhaylovskiy at ericsson.com" <denis.mikhaylovskiy at ericsson.com>; "redback-nsp at puck.nether.net" <redback-nsp at puck.nether.net> 
Sent: Thursday, February 16, 2012 3:13 PM
Subject: Re: [rbak-nsp] ether-12-port not functioning

Navin Nepali wrote:
> Suddenly our SE800 ether-12-port  card didn't work. Hardware status shows the card is not installed. Please kindly help me to resolve this issue.
>  What may be the problem?

You have to run diagnostics for this card:

[local]SE600(config)#card ether-12-port 2
[local]SE600(config-card)#shutdown
[local]SE600(config-card)#on-demand-diagnostic
[local]SE600(config-card)#end

then
[local]SE600#diag on-demand card 2 level 2

I think that level 2 is enough to see, probably level 1 will show some issues.

If you have removed and insert the card, there should be POD log in system, so drop here output of:
[local]SE600#show diag pod card 2 detail


Regards,
Marcin


>  Feb 15 21:25:56: %CSM-6-CARD: Initialization failure on card ether-12-port in sl
> ot 2
> Feb 15 21:25:56: %SYSLOG-2-CRIT: /netbsd: Marking PTD channel DEAD for slot 2
> Feb 15 21:25:56: %CSM-6-CARD: card ether-12-port REMOVED in slot 2
> Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/1 link state DOWN, admin is UP
> Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/2 link state DOWN, admin is UP
> Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/3 link state DOWN, admin is UP
> Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/5 link state DOWN, admin is DOWN
> Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/6 link state DOWN, admin is DOWN
> Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/10 link state DOWN, admin is DOWN
> Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/11 link state DOWN, admin is DOWN
> Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/12 link state DOWN, admin is DOWN
>  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %SYSLOG-2-CRIT: /netbsd:
> Marking PTD channel DEAD for slot 2  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-CARD: card ether-1
> 2-port REMOVED in slot 2  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/1
>  link state DOWN, admin is UP  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/2
>  link state DOWN, admin is UP  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/3
>  link state DOWN, admin is UP  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/5
>  link state DOWN, admin is DOWN  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/6
>  link state DOWN, admin is DOWN  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/1
> 0 link state DOWN, admin is DOWN  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/1
> 1 link state DOWN, admin is DOWN  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/1
> 2 link state DOWN, admin is DOWN 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20120216/7e8e7d99/attachment.html>