[rbak-nsp] Process restart dot1q

[Marcin Kuczera]

Judith Sanders wrote:
> How service effective is the command
> 
> process restart dot1q
> 
> Will it cause all circuits to drop or will it just clear stale sessions?

As I remember there is no impact except that new circuits have to wait 
until process is up again.
However I'am not sure how about stale sessions, they may also remain 
untouched.

Btw, what you mean by stale sessions ? some CLIPS/PPPoE circuits ?
Drop some example.

Regards,
Marcin



> 
>  
> 
> Judith Sanders
> 
> Pioneer Telephone
> 
> Inside Plant Networking Services
> 
> jasanders at ptci.com <mailto:jasanders at ptci.com> 405.375.0645
> 
> */"It takes courage to grow up and turn out to be who you really are."
> – e. e. cummings/*
> 
>  
> 
>  
> 
> ***************************
> This email message and any files transmitted with it are intended solely
> for the use of the individual or entity  for whom it is addressed.  It
> may contain confidential and privileged information. If you are not the
> intended recipient, please contact the sender and destroy all paper and
> electronic copies of this message and its contents.  Any unauthorized
> review, use, disclosure or distribution of this email or any file
> attachments is strictly prohibited.
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp