[rbak-nsp] SE100 repair, cont ;)

[Marcin Kuczera]

hello,

from log:
Jun 8 09:28:54: %LOG-6-TDM_CONS: 2012/6/8 
9:28:52[resMgrHi]pktLayer:ERROR:HI:initPpa2PrimarySCLCore(pktPpaCore_v2.c,560):
Jun 8 09:28:54: %LOG-6-TDM_CONS:     initPpa2PrimarySCLCore():linecard 
slot  2:asic 6:PLL Init failed
Jun 8 09:28:54: %LOG-6-TDM_CONS: 2012/6/8 
9:28:52[resMgrHi]pktLayer:ERROR:HI:pktPpa2InitReg(pktPpaCore_v2.c,472):
Jun 8 09:28:54: %LOG-6-TDM_CONS:     pktPpa2InitReg():linecard slot 
2:asic 6:SCL Init failed
Jun 8 09:28:54: %LOG-6-TDM_CONS: 2012/6/8 
9:28:52[resMgrHi]pktLayer:ERROR:HI:pktPpa2Init(pktPpaCore_v2.c,324):
Jun 8 09:28:54: %LOG-6-TDM_CONS:     pktPpa2Init: pktPpa2InitReg: 
failed. linecard slot  2, asic 6
Jun 8 09:28:54: %LOG-6-TDM_CONS: 2012/6/8 
9:28:52[resMgrHi]pktLayer:ERROR:HI:pktCardSetState(pktCardState.c,134):
Jun 8 09:28:54: %LOG-6-TDM_CONS:     linecard slot  2: GENERIC_FAILURE: 
Card initialization: PHY component initialization failure



Now, reballing is require for:

- SLIP ?
- SQUID ?
- SLIP + SQUID ?

f...cking ROHS...

Regards,
Marcin