[rbak-nsp] Memory upgrade on GE- card

[Mulindwa]

Hi good pple,

Am failing to upgrade memory of this card, anyone with an idea on how to go about this?

I have the memory but when i insert it in, the card is not visible and when i show port it tell me NO card

 
Eric M


________________________________
 From: Marcin Kuczera <marcin at leon.pl>
To: Mulindwa <meric_l at yahoo.com> 
Cc: Liam Murphy <Liam.Murphy at easynet.com>; "redback-nsp at puck.nether.net" <redback-nsp at puck.nether.net> 
Sent: Wednesday, February 29, 2012 5:11 PM
Subject: Re: [rbak-nsp] Memory upgrade on GE- card
 
Mulindwa wrote:
> Dear All,
> 
> Am trying to upgrade memory on the gigaether-4-port card, however , after putting memory on board, card does not come up.
> 
> IS there a pattern of putting the memory chips on the card.


I suppose that this memory must be properly branded (in EEPROM).
I know a company that can make any copy of memory, but it is in Poland..

Regards,
Marcin


> 
> Show hardware
> 
>     * 4    gigaether-4-port     8K505040502560  50   4 12-MAY-2005
>       N/A      N/A 
> sh hardware card 4 detail
> 
> Slot              : 4                Type              : gigaether-4-port
> Serial No         : 8K505040502560   Hardware Rev      : 50             EEPROM id/ver     : 0x5a/4           Mfg Date          : 12-MAY-2005    SysFpga rev       : 0x0              SysFpga file rev  : N/A            LimFpga rev       : 0x0              LimFpga file rev  : N/A            FlipFpga rev      : 0x0              FlipFpga file rev : N/A            IPPA memory       : N/A              EPPA memory       : N/A            Voltage           : N/A              Temperature       : N/A             Card Status       : HW failure       POD Status        : Fail           Card State        : PPA download failure
> ODD Status        : Not Available                                              Fail LED          : N/A              Active LED        : N/A            Standby LED       : N/A             Chass Entitlement : SE400/SE800     Ports Entitled    : All             Active Alarms     : Circuit pack power-on diagnostic failed
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20120301/639e4204/attachment.html>