[rbak-nsp] SE100 loop reboot

marcin at leon.pl marcin at leon.pl
Thu Sep 6 17:25:25 EDT 2012


On 06.09.2012 13:48, noruni at gmail wrote:
> Hello there.
>
> I have a SE100, wich work well, unless, i do a reset.
> now the box is on a reboot loop continuously.
> hope someone alreday have this kind of problem.

2 possibilities in my opinion:
- faulty BSD CF card (most probable)
- faulty XCRP hardware (10% chances)

first of all, replace BSD CF card with i.e. San Disk Extreme (4-8G 
work, didn't test grater).
Than install system using bootrom commands (installsys)

I hope you have config backup.

Regards,
Marcin


>
> here are the log:
> =====
>
> OpenFirmware 2.0.1.4 PRODUCTION RELEASE
> Copyright (c) 1997-2007 by Redback Networks, Inc.
> Compiled 2007-Jan-16 20:35:23 GMT by Release Team
> Primary OFWBIN: main is running; startType = 2; flags = 0x1; dramSize
> = 1024 MB
> Starting PPC1...Success!
> PPC0 init: sdram size=1024, boot_type=0x2,
>  PIR=0x00000000, MSR=0x00002000, machine check disabled.
> L1 cache enabled.
> Initializing L2 Cache...done
> Installing package root...done
> Installing package failsafe...done
> Installing package powerpc_cpu...done
> Installing package display...done
> Installing package openprom...done
> Installing package client-services...done
> Extending package /openprom with SE PROM properties...done
> Extending package /openprom/client-services with SEOFW methods...done
> Installing package memory...done
> Installing package flash...done
> Initializing /options from nv config var...done
> Installing package deblocker...done
> Installing package disklabel...done
> Installing package ide...done
> Installing package eeprom...Management port MAC address =
> 00:30:88:22:f3:f2
> done.
> Installing package ethernet ...done
> Installing package obptftp...done
> Extending package /chosen with SE properties...Done
> loading System FPGA from bootrom...Checksum verified.
> Verifying shark fpga file: Rev 9
> shark FPGA downloaded, verifying...done.
>  AC power input status OK
>  Power Supply 12VDC status indicates OK
> Initializing CF disks...CF-X indicates 'External Compact Flash is not
> present', continuing...done
> Welcome to SmartFirmware(tm) for Redback Networks, PowerPC version
> 2.0.1.4
> Copyright (c) 1997-2007 by Redback Networks, Inc.
> SmartFirmware(tm) Copyright 1996-2000 by CodeGen, Inc.
> All Rights Reserved.
> Minikernel Version: 2.7
> Executing POST
>  Thu 9/06/2012 11:43:14
>  Internal Temp = 25 C
>  PPC0 Temp = 46 C
>  IPPA Temp = 28 C
>
>  Supply 1.1v reads 1.107v
>  Supply 1.2v reads 1.196v
>  Supply 1.5v reads 1.494v
>  Supply 1.8v reads 1.787v
>  Supply 2.5v reads 2.490v
>  Supply 2.6v reads 2.608v
>  Supply 3.3v reads 3.304v
>  Supply 12.0v reads 12.094v
>
>  Fan 1 tach speed: 4326 RPM
>  Fan 2 tach speed: 4440 RPM
>  Fan 3 tach speed: 4326 RPM
>  Fan 4 tach speed: 4687 RPM
>  Fan 5 tach speed: 4218 RPM
> PASSED Loop 1 of 1, 2012/09/06 11:43:15
> POST PASSED
> Auto-boot in 0 seconds - press se* to abort, ENTER to boot: inflating
> image from 0x560001F, 6544256 bytes, to 0x5C3DB9F, 37801390 bytes
> copying inflated image from 0x5C3DB9F, to 0x5600000, 37801390 bytes
> Flushing caches...done
> Creating vxWorks bootline...done.
> Waiting for PPC1...ready to run.
> Checksum verification succeeded.
> loading System FPGA from Compact Flash...done
> inflating image from 0x5600017, 40101 bytes, to 0x5609CBC, 212424
> bytes
> copying inflated image from 0x5609CBC, to 0x5600000, 212424 bytes
> Verifying shark fpga file: Rev 9
> Not reloading System FPGA, versions match.
> Flushing caches...done
> launching (entry=0x05a00000)...
>
> MPSC Lives!
> SEOFW: bound to kernel printf()
> OFW VERSION: PowerPC,rev2.0.1.4
> MINIKERNEL VERSION: 2.7
> BOOTPATH: /ide at 0/disk at 1,0:a
> BOOTARGS: /p01/netbsd
> BOOTDIR: /p01
> NetBSD 1.5.3 (CUSTOM_SE100) #0: Fri Oct 26 11:43:31 PDT 2007
>
> 
> sysbuild at lx-dev4:/home/sysbuild/builds/REL_6_1_1_X/pkt/sw/netbsd153/usr/src/sys/arch/se100/compile/CUSTOM_SE100
>
> CPU: 7447 (Revision 101)
> total memory = 939 MB
> avail memory = 770 MB
> using 1024 buffers containing 4096 KB of memory
> Dumpspace: 0xe90f8000
> The controller card is in slot 1
> mainbus0 (root)cpu0 at mainbus0
> L2CR: 0xC0000000: : unknown size Flow-through synchronous burst SRAM
> with parity backside cache enabled
> vxmem0 at mainbus0gt0 at mainbus0gtpci0 at gt0obio0 at gt0obio1 at
> gt0wdc1 at obio1
> Establishing IRQ 71 of type 3 level 6, func 0x5a070d0 arg 0xe0fe3c88
>  Orig CFB Control Status Reg 0
> CFB Control Status Reg 0
> timeout in wdcwait: wdc1:0, time:20001, set time:20000
> timeout in wdcwait: wdc1:0, time:20001, set time:20000
> wd1 at wdc1 channel 0 drive 0: <STI Flash 7.2.0 RBAKCF512JI> <
> STI1J84506215180938>
> wd1: drive supports 1-sector pio transfers, lba addressing
> wd1: 488 MB, 993 cyl, 16 head, 63 sec, 512 bytes/sect x 1000944
> sectors
> wd1: drive supports PIO mode 4
> conf[0] = 0x88104821
>  Orig CFB PIO Timing Reg 9480c82
> CFB PIO Timing Reg 88104821
> extcf0 at obio1External disk presence status 40
> Establishing IRQ 64 of type 3 level 6, func 0x5baac34 arg 0x1
> Establishing IRQ 65 of type 3 level 6, func 0x5baac34 arg 0x2
> Establishing IRQ 67 of type 3 level 6, func 0x5baac34 arg 0x8
> Establishing IRQ 68 of type 3 level 6, func 0x5baac34 arg 0x10
> Establishing IRQ 75 of type 3 level 6, func 0x5baac34 arg 0x800
> SHARK FPGA: Rev 9, base = 0xe48c7000 status = 0, flag = 0
> obio2 at gt0rtc0 at obio2ds3050 reg attached @ 0xe90fa000
> Current date : century : 21, 09/06/12 (Thu)
> Current time : 11:43:42
> obio3 at gt0obio4 at gt0gfe0 at gt0gfe unit # 0
> gfe attach called
> : address 00:30:88:22:f3:f2, pcr 0x3c00000, pcxr 0, psc 0x1e20218, 
> psr
> 0x1c1c , phy 1 (mii)
>
>  pcr 0x80, pcxr 0, psc 0x1e0021e
> brgphymatch...
> OUI = 2072, MODEL = 12brgphy0 at gfe0 phy 1OUI = 2072, MODEL = 12:
> Media interface
> : BCM5461 1000BASE-T media interface, rev. 1
> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> 1000baseT-FDX, auto
> Establishing IRQ 32 of type 3 level 5, func 0x5b9b6d8 arg 0xe0fe8800
> gfe0: interrupting at 32+0
> gtmpsc0 at gt0 at 0xe91fd000/0x8a99000Establscc0 at mainbus0 Local 
> SCC
> @ 0x60000000 Remote SCC @ 0x00000000
> Mapping in 0x00200000 bytes starting @ 0x64000000 for PTD driver
> (pa=0x38000000)
> ipc0 at mainbus0Mapped Shared Memory Block @ PA 0x5500000 to VA
> 0x5500000
> Establishing IRQ 60 of type 3 level 5, func 0x5b8b6c4 arg 0x0
> flashattach: configuring 1 flash device(s)
> PPA Transport Driver v. 1.0
> init_ptd_sccmem: Init. SCC SDRAM for PTD driver...Done
> ## ptdmem_add: npg 480 size 1966080 bmapsz 60 (pg 0xe0fe0880) ##
> pdtattach: configuring 2 pdt devices
> Initializing RTC NVRAM LOG area @ f4001400 succeeded
> scc_init: Mapped vxWorks memory console @0xe920f000
> Kick_starting vxWorks ....
> vxWorks is booting!!!!!
> Waiting for Vxworks to boot ...
> .VX Redundancy state: ### VX_IS_ACTIVE TRUE ###
> Notifying all processes of ACTIVE status
> VX Redundancy state: ### VX_ACTSTB_DECIDED TRUE ###
> VX Redundancy state: ### VX_BOOT_DONE TRUE ###
> start using scc to keep time...
> I am active
> set max route entry to 190650
> booted_partition: 0
> boot device: wd1
> root on wd1a
> mountroot: trying msdos...
> mountroot: trying nfs...
> mountroot: trying ffs...
> root file system type: ffs
> init: copying out path `/p01/sbin/init' 15
> ** /dev/rwd1a
> ** File system is clean; not checking
> /dev/wd1a on / type ffs (local)
> mfs:9 on /tmp type mfs (asynchronous, local)
> Sep 6 22:44:22 init: Starting in normal mode
> Bogus slot/backplane (1/13), using default.
> Bogus slot/backplane (1/13), using default.
> Bogus slot/backplane (1/13), using default.
> Bogus slot/backplane (1/13), using default.
> pid 442 (syslogd), uid 0: exited on signal 11 (core dumped)
> pid 443 (loggd), uid 0: exited on signal 11 (core dumped)
> Sep 6 22:44:31 init: loggd terminated. Restarting.
> pid 446 (loggd), uid 0: exited on signal 11 (core dumped)
> pid 447 (inetd), uid 0: exited on signal 11 (core dumped)
> Sep 6 22:44:39 init: loggd terminated. Restarting.
> /bin/inetd exited because of signal 11
> Sep 6 22:44:39 init: A core file of /bin/inetd was produced
>
> A core file of /bin/inetd was produced
> Sep 6 22:44:39 init: bootdev: wd1
> Set BSD Redundancy state: ### BSD_COPY_DONE TRUE ###
> pid 448 (loggd), uid 0: exited on signal 11 (core dumped)
> VX Redundancy state: ### VX_BOOT_DONE TRUE ###
> Sep 6 22:44:40 init: checking status of vxWorks...
>
> Sep 6 22:44:40 init: Syncing time from RTC...
>
> Sep 6 22:44:40 init: Starting PM...
>
> Bogus slot/backplane (1/13), using default.
> pid 449 (pm), uid 0: exited on signal 11 (core dumped)
> pid 450 (exec_cli), uid 0: exited on signal 11 (core dumped)
> Sep 6 22:44:48 init: loggd terminated. Restarting.
> /usr/siara/bin/exec_cli exited because of signal 11
> Sep 6 22:44:48 init: A core file of /usr/siara/bin/exec_cli was
> produced
>
> A core file of /usr/siara/bin/exec_cli was produced
> Restarting console CLI....
> Sep 6 22:44:48 init: Process Manager (PM) terminated. Rebooting
> system.
> Process Manager (PM) terminated. Rebooting system./usr/siara/bin/pm
> exited because of signal 11
> Sep 6 22:44:48 init: A core file of /usr/siara/bin/pm was produced
>
> A core file of /usr/siara/bin/pm was produced
> Sep 6 22:44:48 init: Reboot flag set, rebooting system!
> In doReboot 1
> pid 451 (loggd), uid 0: exited on signal 11 (core dumped)
> pid 452 (exec_cli), uid 0: exited on signal 11 (core dumped)
> some one sent SIGTSTP
> VX Redundancy state: ### VERSION B3 TRUE ###
> VX Redundancy state: ### VX_IS_ACTIVE TRUE ###
> Notifying all processes of ACTIVE status
> VX Redundancy state: ### VX_ACTSTB_DECIDED TRUE ###
> syncing disks... done
> unmounting / (/dev/wd1a)...
> uvm_vnp_terminate(0xa6f3a90): terminating active vnode (refs=2)
> uvm_vnp_terminate(0x8aad6c0): terminating active vnode (refs=2)
>
> Bootstrap 2.0.1.4 PRODUCTION RELEASE
> Copyright (c) 1997-2007 by Redback Networks, Inc.
> Compiled 2007-Jan-16 20:37:15 GMT by Release Team
> Primary Bootstrap: main is running; startType = 2
>  PPC0 reboot reason: Software-induced control-plane-only hard reset
>  NMI reason(s): (none)
>  PPC1 reboot reason: Software-induced control-plane-only hard reset
>  NMI reason(s): (none)
> [00]: 80 08 07 0d 0b 02 48 00 - 04 60 70 02 82 08 08 01
> [10]: 0e 04 08 01 02 20 c0 00 - 00 00 00 48 30 48 2a 80
> [20]: 80 80 45 45 00 00 00 00 - 00 3c 48 30 2d 55 00 00
> [30]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 10 91
> [40]: 67 00 00 00 00 00 00 00 - 01 41 4d 50 33 37 31 44
> [50]: 32 38 32 33 58 54 35 2d - 43 42 33 00 00 06 15 31
> [60]: 33 34 32 34 00 00 00 00 - 00 00 00 00 00 00 00 00
> [70]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
>
> DRAMINIT: detected 1024 MB
> Bootstrap: detected 1024 MB of DRAM
> OFWBIN_ldinfo = 0xff8961a0 (48)
>  ._lowest = 0x5000000
>  ._highest = 0x5418fe0
>  ._text = 0x5000000
>  ._etext = 0x50ccec0
>  ._data = 0x50ccec0
>  ._edata = 0x50d6f20
>  ._bss = 0x50d6f20
>  ._end = 0x5418fe0
>  ._entry = 0x5000000
> OFWZBIN
>  cmp_base = 0xff8961d0
>  cmp_size = 0x5c98a
>  uncmp_size = 0xd6f20
>  uncmp_cksum = 0x86c6a053
> OFWBIN_ZBIN: being decompressed
> OFWBIN_BIN: entire loaded region being flushed
> OFWBIN_BIN: entry being jumped to
>
> OpenFirmware 2.0.1.4 PRODUCTION RELEASE
> Copyright (c) 1997-2007 by Redback Networks, Inc.
> Compiled 2007-Jan-16 20:35:23 GMT by Release Team
> Primary OFWBIN: main is running; startType = 2; flags = 0x1; dramSize
> = 1024 MB
> Starting PPC1...Success!
> PPC0 init: sdram size=1024, boot_type=0x2,
>  PIR=0x00000000, MSR=0x00002000, machine check disabled.
> L1 cache enabled.
> Initializing L2 Cache...done
> Installing package root...done
> Installing package failsafe...done
> Installing package powerpc_cpu...done
> Installing package display...done
> Installing package openprom...done
> Installing package client-services...done
> Extending package /openprom with SE PROM properties...done
> Extending package /openprom/client-services with SEOFW methods...done
> Installing package memory...done
> Installing package flash...done
> Initializing /options from nv config var...done
> Installing package deblocker...done
> Installing package disklabel...done
> Installing package ide...done
> Installing package eeprom...Management port MAC address =
> 00:30:88:22:f3:f2
> done.
> Installing package ethernet ...done
> Installing package obptftp...done
> Extending package /chosen with SE properties...Done
> loading System FPGA from bootrom...Checksum verified.
> Verifying shark fpga file: Rev 9
> shark FPGA downloaded, verifying...done.
>  AC power input status OK
>  Power Supply 12VDC status indicates OK
> Initializing CF disks...CF-X indicates 'External Compact Flash is not
> present', continuing...done
> Welcome to SmartFirmware(tm) for Redback Networks, PowerPC version
> 2.0.1.4
> Copyright (c) 1997-2007 by Redback Networks, Inc.
> SmartFirmware(tm) Copyright 1996-2000 by CodeGen, Inc.
> All Rights Reserved.
> Minikernel Version: 2.7
> Executing POST
>  Thu 9/06/2012 11:45:09
>  Internal Temp = 25 C
>  PPC0 Temp = 46 C
>  IPPA Temp = 28 C
>
>  Supply 1.1v reads 1.107v
>  Supply 1.2v reads 1.196v
>  Supply 1.5v reads 1.494v
>  Supply 1.8v reads 1.787v
>  Supply 2.5v reads 2.490v
>  Supply 2.6v reads 2.608v
>  Supply 3.3v reads 3.304v
>  Supply 12.0v reads 12.094v
>
>  Fan 1 tach speed: 4326 RPM
>  Fan 2 tach speed: 4440 RPM
>  Fan 3 tach speed: 4326 RPM
>  Fan 4 tach speed: 4687 RPM
>  Fan 5 tach speed: 4218 RPM
> PASSED Loop 1 of 1, 2012/09/06 11:45:11
> POST PASSED
> Auto-boot in 0 seconds - press se* to abort, ENTER to boot: inflating
> image from 0x560001F, 6544256 bytes, to 0x5C3DB9F, 37801390 bytes
> copying inflated image from 0x5C3DB9F, to 0x5600000, 37801390 bytes
> Flushing caches...done
> Creating vxWorks bootline...done.
> Waiting for PPC1...ready to run.
> Checksum verification succeeded.
> loading System FPGA from Compact Flash...done
> inflating image from 0x5600017, 40101 bytes, to 0x5609CBC, 212424
> bytes
> copying inflated image from 0x5609CBC, to 0x5600000, 212424 bytes
> Verifying shark fpga file: Rev 9
> Not reloading System FPGA, versions match.
> Flushing caches...done
> launching (entry=0x05a00000)...
>
> MPSC Lives!
> SEOFW: bound to kernel printf()
> OFW VERSION: PowerPC,rev2.0.1.4
> MINIKERNEL VERSION: 2.7
> BOOTPATH: /ide at 0/disk at 1,0:a
> BOOTARGS: /p01/netbsd
> BOOTDIR: /p01
> NetBSD 1.5.3 (CUSTOM_SE100) #0: Fri Oct 26 11:43:31 PDT 2007
>
> 
> sysbuild at lx-dev4:/home/sysbuild/builds/REL_6_1_1_X/pkt/sw/netbsd153/usr/src/sys/arch/se100/compile/CUSTOM_SE100
>
> CPU: 7447 (Revision 101)
> total memory = 939 MB
> avail memory = 770 MB
> using 1024 buffers containing 4096 KB of memory
> Dumpspace: 0xe90f8000
> The controller card is in slot 1
> mainbus0 (root)cpu0 at mainbus0
> L2CR: 0xC0000000: : unknown size Flow-through synchronous burst SRAM
> with parity backside cache enabled
> vxmem0 at mainbus0gt0 at mainbus0gtpci0 at gt0obio0 at gt0obio1 at
> gt0wdc1 at obio1
> Establishing IRQ 71 of type 3 level 6, func 0x5a070d0 arg 0xe0fe3c88
>  Orig CFB Control Status Reg 0
> CFB Control Status Reg 0
> timeout in wdcwait: wdc1:0, time:20001, set time:20000
> timeout in wdcwait: wdc1:0, time:20001, set time:20000
> wd1 at wdc1 channel 0 drive 0: <STI Flash 7.2.0 RBAKCF512JI> <
> STI1J84506215180938>
> wd1: drive supports 1-sector pio transfers, lba addressing
> wd1: 488 MB, 993 cyl, 16 head, 63 sec, 512 bytes/sect x 1000944
> sectors
> wd1: drive supports PIO mode 4
> conf[0] = 0x88104821
>  Orig CFB PIO Timing Reg 9480c82
> CFB PIO Timing Reg 88104821
> extcf0 at obio1External disk presence status 40
> Establishing IRQ 64 of type 3 level 6, func 0x5baac34 arg 0x1
> Establishing IRQ 65 of type 3 level 6, func 0x5baac34 arg 0x2
> Establishing IRQ 67 of type 3 level 6, func 0x5baac34 arg 0x8
> Establishing IRQ 68 of type 3 level 6, func 0x5baac34 arg 0x10
> Establishing IRQ 75 of type 3 level 6, func 0x5baac34 arg 0x800
> SHARK FPGA: Rev 9, base = 0xe48c7000 status = 0, flag = 0
> obio2 at gt0rtc0 at obio2ds3050 reg attached @ 0xe90fa000
> Current date : century : 21, 09/06/12 (Thu)
> Current time : 11:45:37
> obio3 at gt0obio4 at gt0gfe0 at gt0gfe unit # 0
> gfe attach called
> : address 00:30:88:22:f3:f2, pcr 0x3c00000, pcxr 0, psc 0x1e20218, 
> psr
> 0x1c1c , phy 1 (mii)
>
>  pcr 0x80, pcxr 0, psc 0x1e0021e
> brgphymatch...
> OUI = 2072, MODEL = 12brgphy0 at gfe0 phy 1OUI = 2072, MODEL = 12:
> Media interface
> : BCM5461 1000BASE-T media interface, rev. 1
> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> 1000baseT-FDX, auto
> Establishing IRQ 32 of type 3 level 5, func 0x5b9b6d8 arg 0xe0fe8800
> gfe0: interrupting at 32+0
> gtmpsc0 at gt0 at 0xe91fd000/0x8a99000Establscc0 at mainbus0 Local 
> SCC
> @ 0x60000000 Remote SCC @ 0x00000000
> Mapping in 0x00200000 bytes starting @ 0x64000000 for PTD driver
> (pa=0x38000000)
> ipc0 at mainbus0Mapped Shared Memory Block @ PA 0x5500000 to VA
> 0x5500000
> Establishing IRQ 60 of type 3 level 5, func 0x5b8b6c4 arg 0x0
> flashattach: configuring 1 flash device(s)
> PPA Transport Driver v. 1.0
> init_ptd_sccmem: Init. SCC SDRAM for PTD driver...Done
> ## ptdmem_add: npg 480 size 1966080 bmapsz 60 (pg 0xe0fe0880) ##
> pdtattach: configuring 2 pdt devices
> Initializing RTC NVRAM LOG area @ f4001400 succeeded
> scc_init: Mapped vxWorks memory console @0xe920f000
> Kick_starting vxWorks ....
> vxWorks is booting!!!!!
> Waiting for Vxworks to boot ...
> .VX Redundancy state: ### VX_IS_ACTIVE TRUE ###
> Notifying all processes of ACTIVE status
> VX Redundancy state: ### VX_ACTSTB_DECIDED TRUE ###
> VX Redundancy state: ### VX_BOOT_DONE TRUE ###
> start using scc to keep time...
> I am active
> set max route entry to 190650
> booted_partition: 0
> boot device: wd1
> root on wd1a
> mountroot: trying msdos...
> mountroot: trying nfs...
> mountroot: trying ffs...
> root file system type: ffs
> init: copying out path `/p01/sbin/init' 15
> ** /dev/rwd1a
> ** File system is clean; not checking
> /dev/wd1a on / type ffs (local)
> mfs:9 on /tmp type mfs (asynchronous, local)
> Sep 6 22:46:16 init: Starting in normal mode
> Bogus slot/backplane (1/13), using default.
> Bogus slot/backplane (1/13), using default.
> Bogus slot/backplane (1/13), using default.
> Bogus slot/backplane (1/13), using default.
> pid 442 (syslogd), uid 0: exited on signal 11 (core dumped)
> pid 443 (loggd), uid 0: exited on signal 11 (core dumped)
> Sep 6 22:46:25 init: loggd terminated. Restarting.
> pid 446 (loggd), uid 0: exited on signal 11 (core dumped)
> pid 447 (inetd), uid 0: exited on signal 11 (core dumped)
> Sep 6 22:46:33 init: loggd terminated. Restarting.
> /bin/inetd exited because of signal 11
> Sep 6 22:46:33 init: A core file of /bin/inetd was produced
>
> A core file of /bin/inetd was produced
> Sep 6 22:46:33 init: bootdev: wd1
> pid 448 (loggd), uid 0: exited on signal 11 (core dumped)
> Set BSD Redundancy state: ### BSD_COPY_DONE TRUE ###
> VX Redundancy state: ### VX_BOOT_DONE TRUE ###
> Sep 6 22:46:34 init: checking status of vxWorks...
>
> Sep 6 22:46:34 init: Syncing time from RTC...
>
> Sep 6 22:46:34 init: Starting PM...
>
> Bogus slot/backplane (1/13), using default.
> pid 449 (pm), uid 0: exited on signal 11 (core dumped)
> pid 450 (exec_cli), uid 0: exited on signal 11 (core dumped)
> Sep 6 22:46:42 init: loggd terminated. Restarting.
> /usr/siara/bin/exec_cli exited because of signal 11
> Sep 6 22:46:42 init: A core file of /usr/siara/bin/exec_cli was
> produced
>
> A core file of /usr/siara/bin/exec_cli was produced
> Restarting console CLI....
> Sep 6 22:46:42 init: Process Manager (PM) terminated. Rebooting
> system.
> Process Manager (PM) terminated. Rebooting system./usr/siara/bin/pm
> exited because of signal 11
> Sep 6 22:46:42 init: A core file of /usr/siara/bin/pm was produced
>
> A core file of /usr/siara/bin/pm was produced
> Sep 6 22:46:42 init: Reboot flag set, rebooting system!
> In doReboot 1
> pid 451 (loggd), uid 0: exited on signal 11 (core dumped)
> pid 452 (exec_cli), uid 0: exited on signal 11 (core dumped)
> some one sent SIGTSTP
> VX Redundancy state: ### VERSION B3 TRUE ###
> VX Redundancy state: ### VX_IS_ACTIVE TRUE ###
> Notifying all processes of ACTIVE status
> VX Redundancy state: ### VX_ACTSTB_DECIDED TRUE ###
> syncing disks... done
> unmounting / (/dev/wd1a)...
> uvm_vnp_terminate(0xa6eea90): terminating active vnode (refs=2)
> uvm_vnp_terminate(0x8aad6c0): terminating active vnode (refs=2)
>
> Bootstrap 2.0.1.4 PRODUCTION RELEASE
> Copyright (c) 1997-2007 by Redback Networks, Inc.
> Compiled 2007-Jan-16 20:37:15 GMT by Release Team
> Primary Bootstrap: main is running; startType = 2
>  PPC0 reboot reason: Software-induced control-plane-only hard reset
>  NMI reason(s): (none)
>  PPC1 reboot reason: Software-induced control-plane-only hard reset
>  NMI reason(s): (none)
> [00]: 80 08 07 0d 0b 02 48 00 - 04 60 70 02 82 08 08 01
> [10]: 0e 04 08 01 02 20 c0 00 - 00 00 00 48 30 48 2a 80
> [20]: 80 80 45 45 00 00 00 00 - 00 3c 48 30 2d 55 00 00
> [30]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 10 91
> [40]: 67 00 00 00 00 00 00 00 - 01 41 4d 50 33 37 31 44
> [50]: 32 38 32 33 58 54 35 2d - 43 42 33 00 00 06 15 31
> [60]: 33 34 32 34 00 00 00 00 - 00 00 00 00 00 00 00 00
> [70]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
>
> DRAMINIT: detected 1024 MB
> Bootstrap: detected 1024 MB of DRAM
> OFWBIN_ldinfo = 0xff8961a0 (48)
>  ._lowest = 0x5000000
>  ._highest = 0x5418fe0
>  ._text = 0x5000000
>  ._etext = 0x50ccec0
>  ._data = 0x50ccec0
>  ._edata = 0x50d6f20
>  ._bss = 0x50d6f20
>  ._end = 0x5418fe0
>  ._entry = 0x5000000
> OFWZBIN
>  cmp_base = 0xff8961d0
>  cmp_size = 0x5c98a
>  uncmp_size = 0xd6f20
>  uncmp_cksum = 0x86c6a053
> OFWBIN_ZBIN: being decompressed
> OFWBIN_BIN: entire loaded region being flushed
> OFWBIN_BIN: entry being jumped to
>
> OpenFirmware 2.0.1.4 PRODUCTION RELEASE
> Copyright (c) 1997-2007 by Redback Networks, Inc.
> Compiled 2007-Jan-16 20:35:23 GMT by Release Team
> Primary OFWBIN: main is running; startType = 2; flags = 0x1; dramSize
> = 1024 MB
> Starting PPC1...Success!
> PPC0 init: sdram size=1024, boot_type=0x2,
>  PIR=0x00000000, MSR=0x00002000, machine check disabled.
> L1 cache enabled.
> Initializing L2 Cache...done
> Installing package root...done
> Installing package failsafe...done
> Installing package powerpc_cpu...done
> Installing package display...done
> Installing package openprom...done
> Installing package client-services...done
> Extending package /openprom with SE PROM properties...done
> Extending package /openprom/client-services with SEOFW methods...done
> Installing package memory...done
> Installing package flash...done
> Initializing /options from nv config var...done
> Installing package deblocker...done
> Installing package disklabel...done
> Installing package ide...done
> Installing package eeprom...Management port MAC address =
> 00:30:88:22:f3:f2
> done.
> Installing package ethernet ...done
> Installing package obptftp...done
> Extending package /chosen with SE properties...Done
> loading System FPGA from bootrom...Checksum verified.
> Verifying shark fpga file: Rev 9
> shark FPGA downloaded, verifying...done.
>  AC power input status OK
>  Power Supply 12VDC status indicates OK
> Initializing CF disks...CF-X indicates 'External Compact Flash is not
> present', continuing...done
> Welcome to SmartFirmware(tm) for Redback Networks, PowerPC version
> 2.0.1.4
> Copyright (c) 1997-2007 by Redback Networks, Inc.
> SmartFirmware(tm) Copyright 1996-2000 by CodeGen, Inc.
> All Rights Reserved.
> Minikernel Version: 2.7
> Executing POST
>  Thu 9/06/2012 11:47:03
>  Internal Temp = 25 C
>  PPC0 Temp = 46 C
>  IPPA Temp = 28 C
>
>  Supply 1.1v reads 1.107v
>  Supply 1.2v reads 1.196v
>  Supply 1.5v reads 1.494v
>  Supply 1.8v reads 1.787v
>  Supply 2.5v reads 2.490v
>  Supply 2.6v reads 2.608v
>  Supply 3.3v reads 3.304v
>  Supply 12.0v reads 12.094v
>
>  Fan 1 tach speed: 4218 RPM
>  Fan 2 tach speed: 4440 RPM
>  Fan 3 tach speed: 4326 RPM
>  Fan 4 tach speed: 4687 RPM
>  Fan 5 tach speed: 4218 RPM
> PASSED Loop 1 of 1, 2012/09/06 11:47:05
> POST PASSED
> Auto-boot in 4 seconds - press se* to abort, ENTER to boot: aborted
> ok
> ok
> =====
> Thanks for any help
> Noru



More information about the redback-nsp mailing list