[rbak-nsp] ftp & permission denied errors

[Eugene Prokopiev]

2013/2/11 Marcin Kuczera <marcin at leon.pl>

>
> Well, strange.
> Do you have both external CF cards in ?
> Try to remove one from std-by XCRP and put in again.
>

I tried to remove and put again both CF cards, so the messages was:

Critical        Feb 14 00:53:56 %SYSLOG-2-CRIT: /netbsd: wdc: card detect
event, intrs = 5, status = 0xbb, flag = 0x1
Critical        Feb 14 00:53:56 %SYSLOG-2-CRIT: /netbsd: wd2 detached
Critical        Feb 14 00:53:57 %SYSLOG-2-CRIT: /netbsd: wdc2 detached
Critical        Feb 14 00:53:57 %SYSLOG-2-CRIT: /netbsd: wdc: 1th
dettachment
Alert   Feb 14 00:53:57 %SYSLOG-1-ALERT: mount_udrv: External disk is not
present: flag 0
Critical        Feb 14 00:53:59 %SYSLOG-2-CRIT: /netbsd: wdc: card detect
event, intrs = 7, status = 0xb7, flag = 0x0
Critical        Feb 14 00:54:02 %SYSLOG-2-CRIT: /netbsd: wdcprobe:0: before
reset, st0=0xff, st1=0xff
Critical        Feb 14 00:54:02 %SYSLOG-2-CRIT: /netbsd: wdc2 at isa0 port
0x170-0x177 irq 10
Critical        Feb 14 00:54:02 %SYSLOG-2-CRIT: /netbsd: Establishing IRQ
10 of type 2 level 6, func 0x5a0afec
Critical        Feb 14 00:54:02 %SYSLOG-2-CRIT: /netbsd: wdc2:0: before
reset, st0=0x50, st1=0x0
Critical        Feb 14 00:54:02 %SYSLOG-2-CRIT: /netbsd: wd2 at wdc2
channel 0 drive 0: <TS2GCF133> <20110825 CF13244D> <20110407>
Critical        Feb 14 00:54:02 %SYSLOG-2-CRIT: /netbsd: wd2: drive
supports 1-sector pio transfers, lba addressing
Critical        Feb 14 00:54:02 %SYSLOG-2-CRIT: /netbsd: wd2: 1911 MB, 3884
cyl, 16 head, 63 sec, 512 bytes/sect x 3915072 sectors
Critical        Feb 14 00:54:02 %SYSLOG-2-CRIT: /netbsd: wd2: drive
supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
Critical        Feb 14 00:54:02 %SYSLOG-2-CRIT: /netbsd: wdc: 2th attachment
Alert   Feb 14 00:54:02 %SYSLOG-1-ALERT: mount_udrv: Detect unsupported
file system on external disk. Please re-format disk.
Alert   Feb 14 00:54:02 %SYSLOG-1-ALERT: mount_udrv: Fail to verify the
external disk presence, flag: 1

How to distinguish active and standy CF cards? How to correctly format both
cards?

-- 
Regards,
Eugene Prokopiev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20130214/eb45affd/attachment.html>