[rbak-nsp] QoS exception

[Piotrek S.]

Hi,

I want to give my customers a higher speed rates from some network places
(eg. from my peering partners, youtube, etc.)

Currently i have simple config without classes:

qos policy pppoe_down metering
 rate 1024 burst 100000
 rate-calculation exclude layer-2-overhead
!
qos policy pppoe_up policing
 rate 1024 burst 100000
 rate-calculation exclude layer-2-overhead
!

In this case configuration is very simple.
Rates are provided by radius/coa (Qos-Rate-Outbound/inbound).

Is it possible to make some exceptions ?

I know... i can make a few policy/metering profiles with different rates
but IMO it is not good way for me (various speeds)

Thanks for any advice.

Regards

P.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20130225/8d673212/attachment.html>