[rbak-nsp] SE100 pppoe session timeout

["Kuba" Dawid Chrzan]

Hi
i came across a problem that i am not able to solve.
There is a customer connected with a pppoe session.
He disconnects his ethernet cable.
Session is disconnected on his PC but it is still visible on SE100 
during about 10 minutes.
During this 10 minutes he is not able to authorize again ( due to 
session number limit ) .

What option is responsible for pppoe timeout ?


  aaa authentication administrator local
  aaa authentication subscriber radius
  aaa accounting subscriber radius
  aaa accounting reauthorization subscriber radius
  aaa update subscriber 10
  aaa accounting event reauthorization
  aaa accounting suppress-acct-on-fail
  aaa reauthorization bulk radius
  radius accounting server 213.25.xxx.xx1 encrypted-key 
C3............................5 port 1913
  radius coa server 213.25.xxx.xx1 encrypted-key 
C3............................5 port 1700
  radius server  213.25.xxx.xx1 encrypted-key 
C3............................5 port 1912
  radius max-retries 3
  radius timeout 30
  radius attribute calling-station-id format slot-port
  radius attribute nas-identifier SE100


-

  subscriber default
    port-limit 1
    ip source-validation
    qos policy policing PPPoE_up
    qos policy metering PPPoE_down
    nat policy-name nat-policy
    ppp mtu 1440
    dns primary 213.25.xxx.xx0
    dns secondary 213.25.xxx.xx2
    session-limit agent-remote-id 1

-- 
Best Regards
"Kuba" Dawid Chrzan