[rbak-nsp] 4PORT-10G crash

[Olivier Benghozi]

Hi Marcin,

About M flag, the doc says: "This flag appears only for mandatory FPGA upgrades; it does not appear for optional FPGA upgrades.".
So M flag only appears if the upgrade is needed for the card to start. However you are still expected to update the FPGA even if it's "optional" (according to the doc) when you upgrade your SEOS.

So what about updating the FPGA ? :)

By the way, here we also had one 10ge-4 crash/reboot with 11.1.2.5 (FPGA was up to date).

-- 
regards,
Olivier


Le 29 mai 2013 à 11:20, Marcin Kuczera <marcin at leon.pl> a écrit :

> Hello,
> 
> recently we had 3 linecard crashes in our SE600 within a week (last 2 within 20 minutes)
> Redback Networks SmartEdge OS Version SEOS-11.1.2.7-Release
> 
> 
> What is suspected:
> 
> May 29 08:23:00: %CSM-6-CARD: card 10ge-4-port INSERTED in slot 1
> May 29 08:23:01: %SYSLOG-1-ALERT: csm: FPGA mismatch detected on card
> 10ge-4-port in slot 1
> 
> 
>  1 : 10ge-4-port                 1 : 10ge-4-port               Yes IEUDR
> 
> there is no M flag here that FPGA upgrade is required...
> Some kind of bug ?
> 
> 
> Now we have waiting SEOS-11.1.2.7p2-Release in a case of next crash,
> but - anyone faced similar problems with SEOS-11.1.2.7-Release ??