[rbak-nsp] LACP maximum-links limit for access type is 2 in SE100?

[Łukasz Kopiszka]

I try increase maximum-links:
[CLIPS]ALFASYSTEM(config-link-group)#maximum-links 3

but I got error:
% maximum-links must be 2 for access type link-group with current PPA card

Its hardware, software limitation or should I look deeper in my 
configuration to fix it?



My working config with "maximum-links 2":

[CLIPS]ALFASYSTEM#show configuration link-group
link-group LAG-SUBSCRIBERS access
  description LAG-do-SUBSCRIBERS
  encapsulation dot1q
  dot1q pvc 80 encapsulation multi
   bind interface DMZ CLIPS
[...]
  dot1q pvc 2108 encapsulation multi
   bind interface ap-2108 MGMT
  maximum-links 2
  lacp active
!

[CLIPS]ALFASYSTEM#show configuration port
port ethernet 2/3
  no shutdown
  encapsulation dot1q
  link-group LAG-SUBSCRIBERS
!
port ethernet 2/4
  no shutdown
  encapsulation dot1q
  link-group LAG-SUBSCRIBERS
!


[CLIPS]ALFASYSTEM#show version
Redback Networks SmartEdge OS Version SEOS-6.5.1.5-Release
Built by sysbuild at SWB-node07 Fri May 4 15:54:19 PDT 2012
Copyright (C) 1998-2012, Redback Networks Inc. All rights reserved.
System Bootstrap version is PowerPC,rev2.0.1.4
Installed minikernel version is 2.7


[CLIPS]ALFASYSTEM#show hardware
Slot Type                 Serial No      Rev  Ver Mfg Date Voltage Temp
---- -------------------- -------------- ---- --- ----------- -------- 
-------
N/A  backplane            B922D3911D28YP  022   4 24-SEP-2011 N/A      N/A
1    xcrp                 B322D3911D28U9  022   4 24-SEP-2011 OK       
NORMAL
2    carrier              1622D3911D28U9  022   4 24-SEP-2011 N/A      
NORMAL
      MIC1: ge-2-port      C120G300740148 OK       NORMAL
      MIC2: ge-2-port      C120G360740476 OK       NORMAL
-- 
Pozdrawiam,
Łukasz Kopiszka
www.alfa-system.pl