[rbak-nsp] CLIPS + multicasts (IPTV)

[Marcin Kuczera]

Hello,

we try to activate clips subscribers with IPTV service (STB).

Does it require any specific configuration ?

Our config below, software release 12.1.1.2, platform SE600.

!
context clips
!
  no ip domain-lookup
!
  interface clips multibind
   ip address 193.93.93.1/24
   dhcp server interface
   ip arp proxy-arp
   igmp version 3
   pim sparse-mode passive
!
  interface iptv
   ip address 192.168.168.2/30
   pim sparse-mode
!
  interface vlan4050
   ip address 91.195.159.122/30
!
  aaa authentication administrator local
  aaa authentication administrator maximum sessions 1
  aaa authentication subscriber radius
!
  radius server 1.1.1.1 encrypted-key XXX
!
  subscriber default
    ip multicast receive permit
    ip source-validation
    dns primary 193.3.203.3
    dns secondary 195.66.73.10
!
  ip route 0.0.0.0/0 91.195.159.121
!
  ip mstatic 0.0.0.0/0 192.168.168.1
!
!
  pim rp-address 192.168.168.1
!
!
  dhcp server policy
    nak-on-subnet-deletion
    option domain-name-server 195.3.203.3 195.66.73.10
    default-lease-time 900
    maximum-lease-time 900
    subnet 193.93.93.0/24
      option router 193.93.93.1
!
!
end


the only info from log is:
Nov 15 14:04:12: [0009]: %IGMP-7-PROTO: Receive v3 report from 
193.93.93.11 on clips circuit 1/3:511:63:31/7/2/158


If we bind a static vlan to regular ip interface (DHCP) - it works, if 
subscriber is dynamic via CLIPS - no success..

Regards,
Marcin