[rbak-nsp] Upgrade to SEOS 6.4.1.3

[Заикин Станислав]

24.09.2013 11:43, Sokvantha YOUK пишет:
> Dear All,
>
> I am trying to upgrade SE100 from SEOS-6.1.5.1 to SEOS-6.4.1.3. I have
> strange problem that once I run release download, it runs never end.
> May you advice me what was the problem? What may I done wrong?
>
> This is my show version output:
> Redback Networks SmartEdge OS Version SEOS-6.1.5.1-Release
> Built by sysbuild at SWB-node14 Fri May 29 15:36:35 PDT 2009
> Copyright (C) 1998-2009, Redback Networks Inc. All rights reserved.
> System Bootstrap version is PowerPC,rev2.0.1.4
> Installed minikernel version is 2.7
>
> I am upgrading to version 6.4.1.3 as below output. Beside, I got error
> at creating remote directory failed as you may see it in following
> output.
>
> Router Up Time -   1 hour 29 minutes 42 secs
> Remote system type is UNIX.
> Using binary mode to transfer files.
> 200 Type set to I.
> 250 CWD command successful.
> remote: SEOS-mips-6.4.1.3.tar.gz
> 229 Entering Extended Passive Mode (|||62489|)
> 150 Opening BINARY mode data connection for 'SEOS-mips-6.4.1.3.tar.gz'
> (120692550 bytes).
> Sep 24 12:50:25.277: %DLM-3-INVALID_TAG: Invalid information tag FLAG
> Sep 24 12:50:25.763: %DLM-3-GENERAL_ERR: Cannot create directory:
> /ata0/p02/usr/siara/bin/, remote mkdir failed.
>
> Please advice me what I have missed?
>
Hello.
There is a individual package for SE100 ("SEOS-se100-6.4.1.3.tar.gz" not 
"SEOS-mips-6.4.1.3.tar" ).

-- 
Stanislav Zaikin