[rbak-nsp] OSPF

[Maciej Hiller]

you have two mpls router

router mpls
router mpls-static

if you want 'router mpls-static', you should remove 'router mpls'

Maciej

W dniu 2014-08-29 23:10, Brandon Leeberg napisał(a):
> THANK YOU!!! We got the OSPF session up and running! Now, I'm beating
> my head against the keyboard because MPLS won't come up. Ugh. I have
> attached the config for both units. Any glaring problems jump out at
> you?
> 
> ROUTER 1:
> 
> interface MPLS-KSPS p2p
> 
>  ip address 10.255.255.10/30
> 
> !
> 
> interface Management
> 
>  ip address 10.100.0.24/24
> 
> !
> 
> interface Zelda
> 
>  ip address 10.255.255.13/30
> 
> !
> 
> interface loop1 loopback
> 
>  ip address 10.255.254.2/32
> 
> logging console
> 
> !
> 
> router ospf 1
> 
>  fast-convergence
> 
>  router-id 10.255.254.2
> 
>  mpls tunnel-shortcuts
> 
>  area 0.0.0.0
> 
>  interface Zelda
> 
>  neighbor 10.255.254.1
> 
>  interface loop1
> 
>  passive
> 
> !
> 
> router mpls
> 
>  interface Zelda
> 
> !
> 
> router ldp
> 
>  tunnel-shortcut
> 
>  neighbor 10.255.254.1 targeted
> 
>  interface loop1
> 
>  interface MPLS-KSPS
> 
> !
> 
> router mpls-static
> 
>  interface Zelda
> 
>  label-action 37 pop
> 
> ROUTER 2:
> 
> interface MPLS-KSPS p2p
> 
>  ip address 10.255.255.9/30
> 
> !
> 
> interface Management
> 
>  ip address 10.255.255.6/30
> 
> !
> 
> interface Sonic
> 
>  ip address 10.255.255.14/30
> 
> !
> 
> interface loop1 loopback
> 
>  ip address 10.255.254.1/32
> 
> logging console
> 
> !
> 
> router ospf 1
> 
>  fast-convergence
> 
>  router-id 10.255.254.1
> 
>  mpls tunnel-shortcuts
> 
>  area 0.0.0.0
> 
>  interface Sonic
> 
>  neighbor 10.255.254.2
> 
>  interface loop1
> 
>  passive
> 
> !
> 
> router mpls
> 
>  interface Sonic
> 
> !
> 
> router ldp
> 
>  tunnel-shortcut
> 
>  neighbor 10.255.254.2 targeted
> 
>  interface loop1
> 
> !
> 
> router mpls-static
> 
>  interface Sonic
> 
>  lsp KSPS
> 
>  egress 10.255.255.10
> 
>  next-hop 10.255.255.10
> 
>  out-label 37
> 
> This is the message that I’m seeing:
> 
> Aug 29 13:50:52: [0001]: %MPLS-STATIC-7-LSP: lsp KSPS check set nhop
> 
> Aug 29 13:50:52: [0001]: %MPLS-STATIC-7-LSP: lsp KSPS LM dwld for set
> nhop
> 
> Aug 29 13:50:52: [0001]: %MPLS-STATIC-7-LSP: lsp KSPS set nhop, out
> lbl in
> 
> AUG 29 13:50:52: [0001]: %MPLS-STATIC-7-LSP: LSP DELETE DUE TO NHOP
> DOWN EGRESS 10.255.255.10 TUN 2
> 
> Aug 29 13:50:52: [0001]: %MPLS-STATIC-7-LM: lsp dwld tnlid 2
> 
> Aug 29 13:50:52: [0001]: %MPLS-STATIC-7-LM: msg to LM for lsp KSPS
> type 0x1 ingress 0x0 egress 10.255.255.10 nhop 10.255.255.10ing_tun 2
> eg_tun 0 nh_type 2 flag 0x100001 set 0 is_lsp 1 in_lbl 0 out_lbl
> 0x1000025
> 
> Aug 29 13:50:52: [0001]: %MPLS-STATIC-7-LSP: lsp KSPS lm dwld ok flag
> 0x92 state 0x5 action 0x8 type 0x1
> 
> Aug 29 13:51:07: %MPLS-STATIC-7-NEXTHOP: Starting nhop RIB resolution
> 
> Aug 29 13:51:07: [0001]: %MPLS-STATIC-7-NEXTHOP: Checking nexthop addr
> 10.255.255.10, nhop state 1
> 
> Aug 29 13:51:07: [0001]: %MPLS-STATIC-7-NEXTHOP: RIB query returned UP
> for nexthop addr 10.255.255.10
> 
> AUG 29 13:51:07: [0001]: %MPLS-STATIC-7-NEXTHOP: INTF GRID 0X100BFFFB
> DOESN'T HAVE MPLS_STATIC ENABLED
> 
> AUG 29 13:51:07: [0001]: %MPLS-STATIC-7-LSP: INTERFACE NOT UP, RESET
> NHOP FLAG
> 
> Aug 29 13:51:07: [0001]: %MPLS-STATIC-7-NEXTHOP: nexthop
> 10.255.255.10: old conngrid 0x100bfffb, encap type 0x1000400, new
> conngrid 0x100bfffb, encap type 0x1000400, nhop state 0
> 
> Aug 29 13:51:07: [0001]: %MPLS-STATIC-7-LSP: Update walker for lsp
> KSPS, lsp_flags 0x93 state 0x5 action 0x8
> 
> Aug 29 13:51:07: [0001]: %MPLS-STATIC-7-LSP: lsp KSPS check set nhop
> 
> Aug 29 13:51:07: [0001]: %MPLS-STATIC-7-LSP: lsp KSPS LM dwld for set
> nhop
> 
> Aug 29 13:51:07: [0001]: %MPLS-STATIC-7-LSP: lsp KSPS set nhop, out
> lbl in
> 
> Aug 29 13:51:07: [0001]: %MPLS-STATIC-7-LSP: lsp KSPS lm dwld ok flag
> 0x92 state 0x5 action 0x8 type 0x1
> 
> Thank you so much for your help, and patience with me!! I’m so used
> to Cisco, and this is just so different!!
> 
> Brandon
> 
> -----Original Message-----
>  From: Maciej Hiller [mailto:maciej.hiller at host24.pl]
>  Sent: Friday, August 29, 2014 9:24 AM
>  To: Brandon Leeberg
>  Cc: redback-nsp at puck.nether.net
>  Subject: RE: [rbak-nsp] OSPF
> 
> try to change ip
> 
> 10.255.255.9/30 on 10.255.0.9/30
> 
> 10.255.255.10/30 on 10.255.0.10/30
> 
> or loopback
> 
> to different /24 class