[rbak-nsp] static CLIPS

[Илья Савин]

Hi, Marcin!

Nice to meet you again :)

We use static CLISP for subscribers, who for some reasons cannot use DHCP.
Subscriber binding configured on ethernet port (or dot1q pvc), for example:

port ethernet 1/1
 dot1q pvc 81
  service clips
  clips pvc 8102
   bind subscriber dormash at static
  clips pvc 8104
   bind subscriber nsg-himmash at static
  clips pvc 8111
   bind subscriber samson at static

IP address and qos policy taken from radius. In this case username is not
MAC address but "some_user_name at context_name".

Compared with dynamic CLIPS it a bit uncomfortable. For our own servers and
some exclusive customers we using context with directly connected
interfaces. Without sessions, authentication and accounting.

Regards,
Ilya Savin.


2014-02-07 18:39 GMT+04:00 Marcin Kuczera <marcin at leon.pl>:

> hello,
>
> does anyone uses static CLIPs configuration ?
>
> I'am wondering, if this could be used in hosting environment, where no
> DHCP is used, IPs are fixed per server or VPS.
> In this case subsriber circuit/handle would be used for radius accounting
> + individual policies.
>
> Is that reasonable idea ?
>
> Regards,
> Marcin
>
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20140207/9acc784b/attachment.html>