[rbak-nsp] Failed to rebuild MRFC image

[Golem]

Hello

I can confirm. I'm using NAT and theres lot of changing subscriber forward policy (via coa) which contains "redirect destination local"

After lot of these errors redback stopped to forward data to new subscribers, only letting them to auth successfully and keeping it up without any traffic. 

If I stop using any nat + forward policy with destination local , does it resolve problem ?

Rafal









Friday, January 17, 2014, 5:17:37 PM, you wrote:

> 2014/1/17 Golem <golem at mtm-info.pl>
> Hello Redback-nsp,

> What does these errors mean ?

> Jan 17 15:21:48: %CLS-3-ERR: (WORK) cls_work_build_image at 222:
> failed to rebuild MRFC image 0x190b rc 0x808b0013

> Last  days  amount  of  them increased. Is there any way to debug what
> cause this error ?



> show crashfiles - there are some but doesn't generate crashfiles
>       697105 Jan 11 10:34 /md/20140111_103400_clsd_15545.core
>       674818 Jan 12 13:05 /md/20140112_130518_clsd_19817.core
>       676392 Jan 13 10:56 /md/20140113_105639_clsd_25013.core



> Some hardware info we use:
> Redback Networks SmartEdge OS Version SEOS-12.1.1.2-Release
> Built by sysbuild at eussjlx7010.sj.us.am.ericsson.se Mon Apr 15 01:52:00 PDT 2013
> Copyright (C) 1998-2013, Redback Networks Inc. All rights reserved.
> System Bootstrap version is Mips,rev2.0.2.66
> Installed minikernel version is 11.7

> show diag pod card 2 detail - shows all pass



> --
> Best regards,
>  Ozga Rafal                          mailto:golem at mtm-info.pl


> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp


> Hi,

> I have the same problem.

> As fas as I diagnosed, it happens randomly when changing
> subscribers forward-policy which contains "redirect restination
> local" and that subscriber has assigned nat-policy at the same time.

> When this error apears, particular subscriber can't communicate with redback.

> My hardware is se600 with ge2-10-port.
> Seos: 12.1.1.5





-- 
Best regards,
Ozga Rafal                          mailto:golem at mtm-info.pl