[rbak-nsp] link-group and NAT

[Marcin Kuczera]

Hello,
recently we are facing a little issue, can not start NAT on link-group - 
access mode.

[clips-test]R0_SE600(config-if)#ip nat CLIPS acl-counters
% interface is bound to a circuit that is not supported by NAT

SEOS 12.1.1.7p1


Are there any other limitations on link-group ?
Is there any plan to support NAT on link-group ?

Regards,
Marcin


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20140729/8a2f4c84/attachment.html>