[rbak-nsp] Request for Pseudo Wire Configuration Example

[Sokoudjou Raoul]

!!!! The configuration for the PE1 router is as follows: this configuration
assumes that ospf, mpls and ldp are operational between the two PEs

[local]PE1(config)#context local
[local]PE1(config-ctx)#interface loopPE1 loopback
[local]PE1(config-if)#ip address 1.1.1.1/32
[local]PE1(config-if)#exit

!!!! configure Multi hop LDP (it is assumed that mpls and ldp are already
operational on the link between the two

[local]PE1(config-ctx)#router ldp
[local]PE1(config-ldp)#neighbor 2.2.2.2  targeted
[local]PE1(config-ldp)#exit

!!!! pseudo wire cross connection configuration

[local]PE1(config-ctx)#  l2vpn
[local]PE1(config-l2vpn)# l2vpn ldp
[local]PE1(config-l2vpn-ldp)# xc 1/2 vlan-id 1001 vc-id 1000 peer 2.2.2.2
[local]PE1(config-l2vpn-ldp)#exit
[local]PE1(config-l2vpn)#exit
[local]PE1(config-ctx)#exit

port and circuit config on PE1, this circuit is cross-connected to the a
circuit (dot1q) on the port  of PE2

[local]PE1(config)#port ethernet 1/2
[local]PE1(config-port)# no shutdown
[local]PE1(config-port)# encapsulation dot1q
[local]PE1(config-port)# dot1q pvc 1001
[local]PE1(config-port)# l2vpn local


*Raoul Sokoudjou*

Ingénieur Support BackBone Completel-Numéricable, Mobile : 0637716894

*COMPLETEL : *Tour Ariane - 5, place de la Pyramide - 92088 La   Défense
Cedex

*NUMERICABLE : *10, rue Albert Einstein - Champs sur Marne - 77437 Marne La
Vallée Cedex 2


On 16 May 2014 16:35, Sokoudjou Raoul <rsokoud at gmail.com> wrote:

> do you mean this one  ??? with  a pseudo wire cross-connection between PE1
> and PE2
>
>
>
>
>
> *Raoul Sokoudjou*
>
> Ingénieur Support BackBone Completel-Numéricable, Mobile : 0637716894
>
> *COMPLETEL : *Tour Ariane - 5, place de la Pyramide - 92088 La   Défense
> Cedex
>
> *NUMERICABLE : *10, rue Albert Einstein - Champs sur Marne - 77437 Marne
> La Vallée Cedex 2
>
>
> On 16 May 2014 15:51, Michael J. Gage <mgage at localtel.net> wrote:
>
>> I have two SE800 units running 11.1.x that I would like to test creating
>> a Pseudo Wire circuit between the two locations.
>>
>> The goal is to pass layer 2 packets from a physical interface on one unit
>> across an existing dot.1q link-group to a physical port on the other.
>>
>> Any help would be appreciated.
>> _______________________________________________
>> redback-nsp mailing list
>> redback-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/redback-nsp
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20140516/7dded386/attachment-0001.html>